Bunny Amigurumi For Handmade Baby Shower Gifts

Why This Pattern Is Worth Your Time

There's a particular kind of joy that comes from finishing a small project you can hold in two hands, and this bunny amigurumi delivers exactly that. Worked in worsted weight yarn with a 3.5 mm hook, the stitches stay soft and squishy, building a body that measures roughly 10 inches tall and 7 inches wide when complete. The rounds are short enough to memorize quickly, and the finished piece has that satisfying, slightly weighted feel that makes you want to set it on a shelf and smile every time you walk past.

The pattern is written for beginners, so the techniques stay friendly and approachable. You'll work single crochet in continuous spirals, single crochet, single crochet, and simple increases and decreases to shape the head, body, ears, and little limbs. Each piece is crocheted separately and then sewn together, giving you a clear sense of progress as the bunny comes together piece by piece. Because the hook is slightly smaller than typical for worsted yarn, the fabric holds its shape well and the stuffing stays neatly tucked inside.

Once finished, this bunny fits naturally into a nursery corner, a reading nook, or a child's bedside table, and it also makes a thoughtful handmade gift for a new parent or a small friend learning the joy of a soft companion. At about 10 inches tall, it's large enough to cuddle but small enough to pack in a tote for a weekend trip. If you're looking for a project that teaches the rhythm of amigurumi without rushing into tricky shaping, this one gives you a complete, huggable result in a manageable number of rounds.

Reading This Pattern: Key Notes

This little bunny is a quick, satisfying make that fits nicely into a weekend project. The shape is simple, the pieces come together fast, and the finished doll has that soft, huggable look that appeals to both kids and adults. It works well as a nursery gift, a desk companion, or a handmade toy for someone special. Because the construction uses only basic stitches and a small number of pieces, it is a great choice for anyone who wants to build confidence with amigurumi or try a new color combination without committing to a large, complex pattern.

For a finished bunny about 10 inches (25 cm) tall and 7 inches (18 cm) wide, a worsted weight yarn is the most reliable choice. A 3.5 mm hook paired with this yarn weight will give you a tight, even fabric that holds stuffing nicely and keeps the shape firm. Cotton blends and acrylic yarns both work well, so pick whatever feels best in your hands. For color, a soft pastel body with a contrasting inner ear, belly, and cheek patch is a classic look, but you can also go bold with a single bright shade or mix speckled yarn with a solid accent. Safety eyes, a small amount of black yarn for the nose and mouth, and a bit of fiberfill stuffing round out the materials.

One common pitfall with amigurumi is loose tension, which lets stuffing peek through the stitches and makes the finished piece look uneven rather than smooth. To avoid this, keep your stitches snug, check your gauge as you go, and use a slightly smaller hook if your fabric feels too soft. Counting stitches in every round also helps the shape stay balanced, especially around the head and ears where small errors can shift the whole look of the bunny.

Materials and Supplies You'll Need

Material	Details
Yarn	worsted yarn in light blue, white, black, pink
Hook	3.5 mm crochet hook
Stuffing	Polyfill or fiberfill
Eyes	Safety eyes or embroidery thread
Extras	Yarn needle, stitch markers, scissors

Gauge: Approximately 12 sc x 14 rounds = 4 inches with 3.5 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.

Stitches and Abbreviations Used

Note: This pattern uses US crochet terms. All rounds are worked in continuous rounds unless stated otherwise. Use a stitch marker in the first stitch of each round.

Abbreviation	Meaning
sc	Single crochet
inc	Increase (2 sc in same stitch)
dec	Decrease (sc 2 together)

The Full Pattern, Step by Step

head, light blue yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (3 sc, inc) x 6 (30)

Rnd 6: sc around (30)

Rnd 7: sc around (30)

Rnd 8: (3 sc, dec) x 6 (24)

Rnd 9: (2 sc, dec) x 6 (18)

Rnd 10: (1 sc, dec) x 6 (12)

Rnd 11: dec around (6)

Rnd 12: fasten off, close hole (6)

body, light blue yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (11 sc, inc) x 2 (26)

Rnd 6: sc around (26)

Rnd 7: sc around (26)

Rnd 8: sc around (26)

Rnd 9: sc around (26)

Rnd 10: sc around (26)

Rnd 11: (11 sc, dec) x 2 (24)

Rnd 12: (2 sc, dec) x 6 (18)

Rnd 13: (1 sc, dec) x 6 (12)

Rnd 14: dec around (6)

Rnd 15: fasten off, close hole (6)

ear (make 2), light blue yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (2 sc, inc) x 2 (8)

Rnd 3: sc around (8)

Rnd 4: sc around (8)

Rnd 5: sc around (8)

Rnd 6: (2 sc, dec) x 2 (6)

arm (make 2), light blue yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 3 (2 sc, inc) x 2 (17)

Rnd 4: sc around (17)

Rnd 5: sc around (17)

Rnd 6: sc around (17)

Rnd 7: sc around (17)

Rnd 8: sc around (17)

Rnd 9: sc around (17)

Rnd 10: sc around (17)

Rnd 11: sc around (17)

leg (make 2), light blue yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: sc around (18)

Rnd 5: sc around (18)

Rnd 6: sc around (18)

Rnd 7: sc around (18)

Rnd 8: sc around (18)

Rnd 9: sc around (18)

Rnd 10: sc around (18)

Rnd 11: sc around (18)

Switch to white yarn for the muzzle.

muzzle, white yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (1 sc, inc) x 3 (9)

Rnd 3: sc around (9)

Rnd 4: (1 sc, dec) x 3 (6)

Rnd 5: fasten off, close hole (6)

Switch to light blue yarn for the nose.

nose, light blue yarn

Embroider the nose with black thread after the eyes are placed.

Work a small triangular satin stitch centered between the eyes, about 8 mm wide.

Switch to black yarn for the eye.

eye (make 2), black yarn

Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.

If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.

If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.

Switch to pink yarn for the cheek.

cheek (make 2), pink yarn

Add the cheek detail with pale pink embroidery thread after the head is closed.

Work two or three tiny straight stitches on each side, just below and outside the eye line.

Switch to black yarn for the mouth.

mouth, black yarn

Embroider the mouth with black or dark brown thread after the eyes are placed.

Use a single curved satin stitch or back stitch, centered below the eyes and about 1.5 cm wide.

Assembling Your Amigurumi

1. Stuff head, body firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.

2. Sew ear to the sides of the head. Position on the upper sides of the head, angled outward. Pin in place before sewing to check alignment from all angles. Use the long tail left for sewing and whipstitch around the base.

3. Sew muzzle to the front of the head. Center between the eyes, slightly below the eye line. Stuff lightly with polyfill before closing for a 3D effect. Pin in place before sewing to check alignment from all angles.

4. Embroider the nose with black thread centered between the eyes. Work a small triangular satin stitch about 8 mm wide.

5. Attach eye to the head. Position on the upper half of the head, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.

6. Sew cheek to the head. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

7. Sew mouth to the head. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

8. Sew arm to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.

9. Sew leg to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.

10. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.

Care Tips for Your Finished Amigurumi

These beginner-friendly tips will help you crochet a well-shaped bunny amigurumi using a 3.5 mm hook. Each suggestion focuses on building consistent stitches and clean finishing so your finished toy looks nicely proportioned and holds up to gentle play.

• Place a stitch marker in the first stitch of every round and move it up as you work, because amigurumi is worked in continuous spirals and it is very easy to lose track of where round one began.
• Keep your tension firm and even throughout the body and head, since loose stitches create small gaps where stuffing will push through and make the surface look bumpy rather than smooth.
• Stuff the piece gradually after every few rounds instead of waiting until the end, because adding fiberfill early lets you shape the curve of the belly, head, and ears more accurately before the opening gets too small.
• When you decrease, work two single crochets together evenly around the round so the fabric closes into a neat dome without a visible point or a pulled corner at the top.
• Check your gauge by crocheting a small swatch of single crochet before starting the body, because a tighter gauge gives a denser fabric that hides stuffing, while a looser gauge produces a softer, drapier bunny.
• Leave a long tail when fastening off each piece so you have plenty of yarn to sew the head, ears, and limbs onto the body securely without the seam popping open later.
• Pin all the parts to the body with sewing pins before you attach them, because this lets you adjust the placement of the ears and eyes until the bunny sits upright and looks balanced from every angle.
• Weave in your ends on the inside of the piece using a yarn needle, tucking the tail into nearby stitches so the ends stay hidden even after washing and gentle handling.

Follow these simple care steps

Good to Know: Reader Questions

What yarn should I use for the bunny amigurumi?

Use a worsted weight yarn for your bunny amigurumi, as this weight gives the stitches a soft, plump look that beginners find easy to manage. Acrylic or cotton blends in worsted weight are widely available and washable, making them great choices for a toy that will be handled often. Avoid very fuzzy or splitty yarns until you are more comfortable with seeing your stitches clearly.

How long does it take to crochet the bunny amigurumi?

The bunny amigurumi typically takes 2-4 hours to complete from start to finish, depending on your crochet speed and how many breaks you take. Most beginners finish in one relaxed afternoon, while faster crocheters can wrap it up in a single evening. Sewing the pieces together adds a little extra time but is included in this.

Is the bunny amigurumi pattern beginner-friendly?

Yes, the bunny amigurumi is rated as a Beginner pattern and uses only basic stitches like single crochet, increases, and decreases. The shaping is simple, and the pieces are small enough to finish quickly without getting bored. If you can hold your hook and yarn comfortably, you have all the skills needed to start.

Can I sell finished bunny amigurumi made from this pattern?

Most crochet pattern designers, including the maker of this bunny amigurumi, allow you to sell finished items made from the pattern as long as you credit the designer. You cannot reproduce or resell the written pattern itself. Small craft fairs, Etsy shops, and local markets are popular places to sell handmade amigurumi toys.

What hook size do I need for the bunny amigurumi?

You will need a 3.5 mm crochet hook to make the bunny amig

Keep Crocheting: More Patterns

Love this pattern? Check out more free crochet patterns:

• Gingerbread Man Amigurumi For Christmas Tree Ornaments
• Totoro Amigurumi For Studio Ghibli Fans And Collectors
• Dalmatian Dog Amigurumi For Nursery Shelf Display
• Football Player Amigurumi For Sports Fan Gifts
• Black Bull Amigurumi For Taurus Zodiac Gifts