Germain Psg Guardian Amigurumi For Soccer Fans
Finished Size: Approximately 10 inches (25 cm) tall and 7 inches (18 cm) wide
Skill Level: Intermediate
Estimated Time: 2-4 hours
Hook Size: 3.5 mm
Yarn: worsted yarn
Notions: Yarn needle, stitch marker, polyfill
Gauge: Approximately 12 sc x 14 rounds = 4 inches with 3.5 mm hook
Why This Pattern Is Worth Your Time
This Germain Psg Guardian amigurumi is an amigurumi doll worked in navy blue, cream, red, and black. You will crochet the head, bear hood, bear ears, body, arms, hands, legs, feet, scarf, eyes, mouth, and the cheeks. The pattern walks through each piece with clear round-by-round counts, then shows how to assemble and finish everything so the result matches the reference photos.
Use the pattern card as your material checklist before starting. Safety eyes give a polished look. The finished piece has a flat base. The instructions include sits upright. Keep your tension even, count stitches at the end of shaping rounds, and check the placement notes before sewing pieces together for a clean handmade result.
Reading This Pattern: Key Notes
This project rewards the maker with a charming little guardian that doubles as both a playful toy and a thoughtful gift for any Paris Saint-Germain supporter in your life. Because the finished figure stands roughly ten inches tall and seven inches wide, it has real presence on a shelf or desk without demanding a huge yarn investment, and the recognizable color blocking makes it instantly readable as a PSG mascot even from across the room. The piece suits crocheters who already feel comfortable working in the round, shaping with simple increases and decreases, and sewing small parts together neatly, so anyone sitting comfortably at an Intermediate skill level will find it engaging rather than overwhelming.
For the body and head you will want a smooth DK or light worsted weight acrylic that holds stitch definition well, since the rounded silhouette depends on tight, even rounds without sagging. A classic navy blue works beautifully for the jersey, paired with a crisp white for the shorts and socks, and a small amount of red for the collar, cuffs, and the iconic center stripe. If you prefer a softer palette, he reads just as clearly in heathered navy with bright white accents, and a touch of skin tone yarn brings the face to life. Using a 3.5 mm hook throughout keeps the stitches firm so the stuffing stays neatly contained and the proportions hold their shape over time.
One pitfall that catches many makers is the decreases, which can pull the fabric into a subtle dimple when worked too tightly around the curve of the head. To avoid this, keep your tension relaxed and insert the hook under both front loops of the next two stitches rather than just the outer loops, then give the stitch a gentle wiggle before tightening. Taking that extra breath between rounds keeps the surface smooth and the finished guardian looking polished.
Yarn, Hooks, and Notions
| Material | Details |
|---|---|
| Yarn | worsted yarn in navy blue, cream, red, black, pink |
| Hook | 3.5 mm crochet hook |
| Stuffing | Polyfill or fiberfill |
| Eyes | Safety eyes or embroidery thread |
| Extras | Yarn needle, stitch markers, scissors |
Gauge: Approximately 12 sc x 14 rounds = 4 inches with 3.5 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.
Abbreviations You'll Need to Know
Note: This pattern uses US crochet terms. All rounds are worked in continuous rounds unless stated otherwise. Use a stitch marker in the first stitch of each round.
| Abbreviation | Meaning |
|---|---|
| sc | Single crochet |
| inc | Increase (2 sc in same stitch) |
| dec | Decrease (sc 2 together) |
| ch | Chain |
Let's Make It: Instructions
head, cream yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: (3 sc, inc) x 6 (30)
Rnd 6: sc around (30)
Rnd 7: sc around (30)
Rnd 8: (3 sc, dec) x 6 (24)
Rnd 9: (2 sc, dec) x 6 (18)
Rnd 10: (1 sc, dec) x 6 (12)
Rnd 11: dec around (6)
Rnd 12: fasten off, close hole (6)
Switch to navy blue yarn for the bear hood.
bear hood, navy blue yarn
Row 1: Ch 10, sc in 2nd ch from hook and across (9)
Row 2: Ch 1, turn, sc across (9)
Row 3: Ch 1, turn, sc across (9)
Row 4: Ch 1, turn, sc across (9)
Row 5: Ch 1, turn, sc across (9)
Row 6: Ch 1, turn, sc across (9)
bear ears (make 2), navy blue yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: (2 sc, inc) x 2 (8)
Rnd 3: sc around (8)
Rnd 4: sc around (8)
Rnd 5: sc around (8)
Rnd 6: (2 sc, dec) x 2 (6)
Rnd 7: fasten off, close hole (6)
body, navy blue yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: (11 sc, inc) x 2 (26)
Rnd 6: sc around (26)
Rnd 7: sc around (26)
Rnd 8: sc around (26)
Rnd 9: sc around (26)
Rnd 10: sc around (26)
Rnd 11: (11 sc, dec) x 2 (24)
Rnd 12: (2 sc, dec) x 6 (18)
Rnd 13: (1 sc, dec) x 6 (12)
Rnd 14: dec around (6)
Rnd 15: fasten off, close hole (6)
arms (make 2), navy blue yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 3 (2 sc, inc) x 2 (17)
Rnd 4: sc around (17)
Rnd 5: sc around (17)
Rnd 6: sc around (17)
Rnd 7: sc around (17)
Rnd 8: sc around (17)
Rnd 9: sc around (17)
Rnd 10: sc around (17)
Rnd 11: sc around (17)
Switch to cream yarn for the hands.
hands (make 2), cream yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: (2 sc, dec) x 6 (18)
Rnd 7: (1 sc, dec) x 6 (12)
Rnd 8: dec around (6)
Rnd 9: fasten off, close hole (6)
Switch to navy blue yarn for the legs.
legs (make 2), navy blue yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: sc around (18)
Rnd 5: sc around (18)
Rnd 6: sc around (18)
Rnd 7: sc around (18)
Rnd 8: sc around (18)
Rnd 9: sc around (18)
Rnd 10: sc around (18)
Rnd 11: sc around (18)
feet (make 2), navy blue yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: (2 sc, dec) x 6 (18)
Rnd 7: (1 sc, dec) x 6 (12)
Rnd 8: dec around (6)
Rnd 9: fasten off, close hole (6)
Switch to red and blue yarn for the scarf.
scarf, red and blue yarn
Row 1: Ch 11, sc in 2nd ch from hook and across (10)
Row 2: Ch 1, turn, sc across (10)
Row 3: Ch 1, turn, sc across (10)
Row 4: Ch 1, turn, sc across (10)
Row 5: Ch 1, turn, sc across (10)
Row 6: Ch 1, turn, sc across (10)
Row 7: Ch 1, turn, sc across (10)
Row 8: Ch 1, turn, sc across (10)
Fasten off, leaving long tail for sewing
Switch to black yarn for the eyes.
eyes (make 2), black yarn
Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.
If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.
If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.
mouth, black yarn
Embroider the mouth with black or dark brown thread after the eyes are placed.
Use a single curved satin stitch or back stitch, centered below the eyes and about 1.5 cm wide.
Switch to pink yarn for the cheeks.
cheeks (make 2), pink yarn
Add the cheek detail with pale pink embroidery thread after the head is closed.
Work two or three tiny straight stitches on each side, just below and outside the eye line.
Final Stitch Counts
- head: 30 stitches at widest point
- bear hood: 9 stitches at widest point
- bear ears (x 2): 8 stitches at widest point
- body: 26 stitches at widest point
- arms (x 2): 17 stitches at widest point
- hands (x 2): 24 stitches at widest point
- legs (x 2): 18 stitches at widest point
- feet (x 2): 24 stitches at widest point
- scarf: 10 stitches at widest point
- eyes (x 2): See pattern
- mouth: See pattern
- cheeks (x 2): See pattern
How to Assemble the Finished Parts
1. Stuff head, bear hood, body, hands, feet firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.
2. Sew bear ears to the sides of the head. Position on the upper sides of the head, angled outward. Pin in place before sewing to check alignment from all angles. Use the long tail left for sewing and whipstitch around the base.
3. Attach eyes to the head. Position on the upper half of the head, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.
4. Sew mouth to the head. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.
5. Sew cheeks to the head. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.
6. Sew arms to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.
7. Sew legs to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.
8. Slip scarf over the body; do not stuff it. Whipstitch the top edge to the shoulders or neckline, and leave the hem free so the garment drapes naturally. Pin evenly before sewing to keep the opening centered.
9. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.
Pro Tips and Care Advice
This free pattern card guides you through crocheting Germain the PSG Guardian amigurumi at an intermediate skill level. The following practical tips and care instructions will help you achieve a well-finished doll using a 3.5 mm hook throughout.
- Place a stitch marker in the first stitch of every round and move it up as you work, because amigurumi is worked in continuous spirals and losing track of the round start causes uneven shaping on the head and body.
- Maintain consistently tight tension by keeping your working yarn wrapped around your fingers and pulling each stitch to the same size, since loose tension creates visible gaps where the stuffing shows through the fabric.
- Use decreases rather than standard two-together decreases on the head and muzzle, because this technique produces a smoother closure with no small holes at the crown or snout.
- Stuff the doll firmly and add small amounts of fiberfill gradually as you close each round, because adding stuffing too late leaves lumps and under-stuffing causes the head to collapse or fold over.
- Check your gauge by crocheting a small swatch in single crochet before starting the body, because a 3.5 mm hook with thinner yarn creates a looser fabric that lets stuffing escape, while a tighter gauge produces a stiff doll.
- When changing colors for the PSG details, work the change on the last pull-through of the previous stitch and carry the yarn inside the piece, because this keeps the color join neat and avoids long floats on the outside.
- Join the limbs to the body with a sturdy whip stitch through both layers, because loosely attached arms or legs pull away during play and leave gaps that expose the stuffing.
- Block the finished pieces lightly with a steam iron held above the surface before assembly, because this relaxes the stitches, evens out the rounds, and helps the parts sit nicely together when sewn.
Common Questions About This Pattern
What skill level is required for the Germain Psg Guardian amigurumi pattern?
The Germain Psg Guardian amigurumi is rated as an Intermediate pattern. You should be comfortable with amigurumi basics like magic ring, single crochet, and working in continuous spirals. Techniques like decreases and the stitch detail for the facial details may appear, so some prior doll-making experience will help you navigate the instructions smoothly.
What hook size and yarn weight should I use for the Germain Psg Guardian amigurumi?
The pattern calls for a 3.5 mm crochet hook paired with worsted weight yarn. This combination gives the tight, defined stitch structure that amigurumi dolls need so the stuffing does not show through. Always check your gauge on a small swatch before starting, since a looser tension may require you to drop down to a 3.0 mm hook.
How long does it take to crochet the Germain Psg Guardian amigurumi?
Most crocheters complete the Germain Psg Guardian amigurumi in 2-4 hours, depending on their pace and how much sewing and embroidery detail they add. Experienced amigurumi makers often finish in a single afternoon, while first-time doll makers may spread the project over a weekend. Blocking and assembly of limbs can add extra time beyond the main crocheting.
Can I sell finished dolls made from the Germain Psg Guardian amigurumi pattern?
Yes, finished dolls crafted from the Germain Psg Guardian amigurumi pattern are generally allowed to be sold in small batches at craft fairs, online shops, and local markets.
Explore More Free Crochet Patterns
Love this pattern? Check out more free crochet patterns: