Single Crochet Ochre Banded Bumblebee Amigurumi Pattern

Finished Ochre-banded Bumblebee handmade crochet piece, front showcase view
Finished Ochre-banded Bumblebee handmade crochet project, front view

Why You'll Love This Pattern

A 3.5 mm hook and DK yarn are all I need for this Ochre-banded Bumblebee. The finished piece stands about 5.5 in (14 cm) tall and 3 in (8 cm) wide, so it fits easily on a shelf or in a pair of hands. I crochet the body and head in rounds as separate pieces, then stuff both before sewing the head to the body. The DK fabric comes out close and smooth, with enough body to hold the round shape.

The two bands are worked in rounds too, and I set them around the body during assembly. Both wings are worked in rows, which gives them a flatter shape beside the round body. The antennae are handled as finishing or embroidery instructions, not as a shaped crocheted piece. Safety eyes and facial embroidery are finishing details as well; they are not extra crocheted pieces. I place everything by eye, checking the front view and the side view before the final sews.

What I enjoy on the hook is the shaping in the body and head. The rounds grow steadily, and once the pieces are stuffed and joined the bee takes on its full shape. The wings sit out from the sides, and the bands give the body a clear break across the middle. Mine lives on a shelf near my worktable for now, though it would make a small gift or a piece for a child's room.

This is a Beginner-level pattern. The separate pieces keep each stage clear, and the finishing asks for care with placement rather than complicated stitches. You may sell items you crochet from this pattern; the written pattern and sheets may not be resold or redistributed.

Pattern Notes

Pattern at a glance: 6 pieces to crochet. Components and details - body, head, band, wing and antenna - worked in 49 rounds and rows to about 5.5 in (14 cm) tall in DK weight with a 3.5 mm hook.

You build this bee from a body and a head worked in rounds, two bands worked in rounds, two wings worked in rows, and two antennae added as finishing or embroidery work rather than crocheted as separate pieces. The head and body stay separate until assembly, when you stuff both and sew them together. That order matters, and it is also where the build gets satisfying: the striped body takes shape first, the bands go on, then the wings and antennae pull the whole thing into focus. Nothing here is fiddly for the sake of being fiddly.

I used ochre and black yarn with a 3.5 mm hook, and the finished bee measures about 5.5 in (14 cm) tall and 3 in (8 cm) wide. A smooth, tightly spun yarn keeps every round readable and helps the seams sit flat. Fuzzy yarn blurs the rounds and catches when you sew, which shows at this size. Ochre carries most of the surface and black marks the bands, so choose a pair with clear contrast between them. If you want a different look, two colors of your own picking work just as well. You are welcome to sell what you crochet from this pattern. The pattern and sheets stay with you and are not resold or redistributed.

The pitfall on this build is the neck seam. The head is its own stuffed piece, so if you overstuff the top of the body or the base of the head, the join bulges and the head tips forward no matter how carefully you sew. Stuff both lightly and evenly first, pin the head, and check the profile from the side before you commit to the seam.

What You'll Need

Finished Size: Approximately 5.5 in (14 cm) tall and 3 in (8 cm) wide

Skill Level: Beginner

Estimated Time: 4-6 hours

Hook Size: 3.5 mm

Yarn: DK yarn

MaterialDetails
YarnDK: ochre 49 m (54 yd), black 2 m (3 yd). Total about 51 m (56 yd).
Hook3.5 mm crochet hook
StuffingPolyfill or fiberfill
EyesSafety eyes or embroidery thread
ExtrasWoven needle, locking stitch marker, sewing pins for positioning, sharp snips

Gauge: Approximately 16 sc x 20 rounds = 4 inches with 3.5 mm hook. Aim for a dense, even fabric with your 3.5 mm hook so the Ochre-banded Bumblebee holds its sculpted shape once stuffed.

Ochre-banded Bumblebee, sheet 1: materials and yarn, stitch abbreviations, instructions for body
Sheet 1 of 5 shows materials and yarn, stitch abbreviations, instructions for body.

Stitches & Abbreviations

Note: This Ochre-banded Bumblebee pattern is written in standard US crochet terms. Pieces are worked in continuous rounds unless noted otherwise; keep a locking marker in the first stitch of each round to track your counts.

AbbreviationMeaning
scSingle crochet
incIncrease (2 sc in same stitch)
decDecrease (sc 2 together)
chChain
Ochre-banded Bumblebee, sheet 2: instructions for band, head, wing, project views
Sheet 2 of 5 shows instructions for band, head, wing, project views.

Pattern Instructions

Product views

Finished Ochre-banded Bumblebee underside view showing base join
Underside view: Ochre-banded Bumblebee base stitches and resting proportion.

Technique Focus For This Project

Practical bench notes covering Stuffing and Joining the Head to the Body, Setting the Two Bands Around the Body, Attaching Flat Wings and Embroidering Antennae.

Stuffing and Joining the Head to the Body

  1. Stuff body and head lightly and evenly, molding polyfill toward the center and keeping the neck edges soft.
  2. Overstuffing the top of the body or base of the head makes the join bulge and tips the head forward.
  3. Pin the stuffed head to the body, check the side profile, then whipstitch around the base with the long yarn tail.

Setting the Two Bands Around the Body

  1. Both bands are worked in rounds from a 6-stitch magic ring, reaching 11 stitches at the widest point before four rounds total.
  2. Stuff each 11-stitch band lightly so it holds shape without pressing a hard ridge into the ochre body.
  3. Pin both bands around the body first, checking front and side views for an even break across the middle.

Attaching Flat Wings and Embroidering Antennae

  1. Work each wing in rows from a chain of 8, giving 7 single crochet stitches across 10 rows for a flat shape.
  2. Pin the wing attachment edge against the body side, then whipstitch along that seam and leave the outer edge free.
  3. Embroider two black antennae directly onto the body after assembly, pinning balanced spacing before working 6-8 mm satin or straight stitches.

Assembly

1. Stuff ochre body, ochre head, ochre bands firmly with polyfill. Shape the stuffing as you go, pressing and molding to create a natural form. Add extra stuffing to the center for a rounded shape, less near the edges for a tapered look.

2. Sew head to the body. Press the parts together at center to judge balance, lock them with sewing pins, and seam around the base with the leftover tail. Fasten off and lose the tail in the stuffing.

3. Sew bands to the body. Match the edges cleanly with pins and view the toy upright before closing the join with neat whipstitches. Run the ends through the seam; a closed joint stays closed.

4. Sew wings to the body. Align the attachment edge against the body and whipstitch along the seam, leaving the outer edge free for a natural, dimensional look.

5. Attach antennas by embroidering directly onto the body with black yarn or embroidery floss, marking balanced placement with pins first. Form neat satin or straight stitches and weave the tails inside.

6. Check all seams are secure. Give each join a soft pull and see whether it holds. Take sharp scissors to the loose threads. Bury the tails: three stitches forward, three back, then cut. Press the piece gently from every side and the stuffing evens out.

Ochre-banded Bumblebee, sheet 5: stitch count table, assembly and finishing, project views
Sheet 5 of 5 shows stitch count table, assembly and finishing, project views.

Tips & Care

Yarn weight is the biggest variable for this ochre-banded bumblebee: a thicker yarn yields a larger companion, while sport or fingering weight creates a miniature keepsake.

These are my bench notes for the Ochre-banded Bumblebee, crocheted with a 3.5 mm hook. The body and head are separate round pieces joined at assembly. You may sell finished items; the pattern and sheets may not be resold or redistributed.

  • Mark the first stitch of each round on the body and head with a separate marker. A marker in only one piece invites a lost count and a head and body that do not meet cleanly at the neck.
  • Work the body and head at an even tension with the 3.5 mm hook, and compare their round heights as you go. A looser head shows stuffing and makes the neck seam bulky after sewing.
  • When you work the decreases that close the body and head, keep them firm without tugging the yarn tight. Loose decreases leave gaps around the closing point, while over-tight stitches pucker the round.
  • Stuff the body firmly and the head a little more softly, then sew the head to the body only after both pieces are stuffed. An overstuffed neck bulges at the seam, and an understuffed head collapses at the sides.
  • For the two bands, work each in rounds to the same count, then pin both around the body at one height before sewing. If one band sits higher, the ochre stripes run unevenly and the body looks twisted.
  • Pin the wings at matching row counts on opposite sides and compare their angles from the front before whipstitching; flat row-work stretches and unpinned wings sit at different angles. I shape the pinned wings on a foam mat with hover steam from a distance, let them cool flat, and never press a hot iron directly onto the fabric.
  • Place the antennae by pinning both positions first, then work equal-length stitches and bury each end inside the head. Working from memory gives different lengths and pulls the face to one side.

I treat the bee as a stuffed textile and wash it gently.

  • Spot clean marks before a full wash.
  • Hand wash gently in cool water with mild soap, and squeeze the piece instead of wringing it. Wringing shifts the stuffing and distorts the stitches around the bands.
  • Press the water out in a clean towel, reshape the body, head, and wings while damp, and air dry flat. Hanging stretches the neck seam and pulls wings out of shape.
  • Keep the dry bee out of direct sun so the ochre bands do not fade. Store it dry and flat with wings supported, and avoid stacking items on top.

FAQ

Can I sell the Ochre-banded Bumblebee I make?

You may sell the finished items you crochet. The written pattern and visual sheets may not be resold or redistributed.

How long does the Ochre-banded Bumblebee take to make?

At the Beginner level, plan for 4-6 hours for this project. The body and head are worked in rounds, the bands are worked in rounds, and the wings are worked in rows, so the time covers those parts plus assembly. The antennae are finishing or embroidery instructions, and the separate head and body are joined at the end.

Can I use a different yarn for the Ochre-banded Bumblebee?

The pattern uses DK weight yarn with a 3.5 mm hook, in ochre and black. If you substitute yarn, choose another DK weight in those two colors and keep the 3.5 mm hook so the parts stay consistent. A different yarn weight will change the finished size and how the separate head and body fit together.

How much yarn does the ochre banded bumblebee use?

The body, head, two bands, two wings, and two antennae use about 49 m (54 yd) of DK ochre and 2 m (3 yd) of DK black, roughly 51 m (56 yd) total. That leaves a little spare from a standard DK ball, so you can match dye lots or rework a piece if needed. I keep the black for the stripes and facial details.

Can I change the colors of the Ochre-banded Bumblebee?

The pattern is written in ochre and black DK, and those two colors create the banded look. If you swap them, use another pair of DK colors with clear contrast so the bands still read. Keep the same yarn weight and 3.5 mm hook so the head and body still match after assembly.

What finishing trick helps the wings and bands sit evenly?

Pin the paired panels before sewing. Place the two wings at matching rows on opposite sides and the two bands at matching rounds, then compare their angles from the front. Adjust the pins until both sides match, and sew the attachment edges only after that check.

Advertisements