Dragon Amigurumi For Kids
Finished Size: Approximately 10 inches (25 cm) tall and 8 inches (20 cm) wide
Skill Level: Intermediate
Estimated Time: 2-4 hours
Hook Size: 4 mm
Yarn: worsted yarn
Notions: Yarn needle, stitch marker, polyfill
Gauge: Approximately 12 sc x 14 rounds = 4 inches with 4 mm hook
The Best Things About This Pattern
This dragon amigurumi is an amigurumi doll worked in black and white. You will crochet the head, body, belly, arm, leg, wing, ear, horn, tail, eye, nostril, tooth, claw, neck, back, spine, wing bone, and the tail tip. The pattern walks through each piece with clear round-by-round counts, then shows how to assemble and finish everything so the result matches the reference photos.
Use the pattern card as your material checklist before starting. Safety eyes give a polished look. It stands upright on its own. The instructions include wired wings. Keep your tension even, count stitches at the end of shaping rounds, and check the placement notes before sewing pieces together for a clean handmade result.
Quick Notes for Success
Gather These Supplies First
| Material | Details |
|---|---|
| Yarn | worsted yarn in black, white |
| Hook | 4 mm crochet hook |
| Stuffing | Polyfill or fiberfill |
| Eyes | Safety eyes or embroidery thread |
| Extras | Yarn needle, stitch markers, scissors |
Gauge: Approximately 12 sc x 14 rounds = 4 inches with 4 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.
Crochet Stitches in This Pattern
Note: This pattern uses US crochet terms. All rounds are worked in continuous rounds unless stated otherwise. Use a stitch marker in the first stitch of each round.
| Abbreviation | Meaning |
|---|---|
| sc | Single crochet |
| inc | Increase (2 sc in same stitch) |
| dec | Decrease (sc 2 together) |
| ch | Chain |
Let's Make It: Instructions
head, black yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: (3 sc, inc) x 6 (30)
Rnd 6: (4 sc, inc) x 6 (36)
Rnd 7: (4 sc, dec) x 6 (30)
Rnd 8: (3 sc, dec) x 6 (24)
Rnd 9: (2 sc, dec) x 6 (18)
Rnd 10: (1 sc, dec) x 6 (12)
Rnd 11: dec around (6)
Rnd 12: fasten off, close hole (6)
Switch to white yarn for the body.
body, white yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: (3 sc, inc) x 6 (30)
Rnd 6: sc around (30)
Rnd 7: sc around (30)
Rnd 8: sc around (30)
Rnd 9: sc around (30)
Rnd 10: sc around (30)
Rnd 11: (3 sc, dec) x 6 (24)
Rnd 12: (2 sc, dec) x 6 (18)
Rnd 13: (1 sc, dec) x 6 (12)
Rnd 14: dec around (6)
Rnd 15: fasten off, close hole (6)
belly, white yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: sc around (24)
Rnd 7: (2 sc, dec) x 6 (18)
Rnd 8: (1 sc, dec) x 6 (12)
Rnd 9: dec around (6)
Rnd 10: fasten off, close hole (6)
Switch to black yarn for the arm.
arm (make 2), black yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (17 sc, inc) x 1 (19)
Rnd 5: sc around (19)
Rnd 6: sc around (19)
Rnd 7: sc around (19)
Rnd 8: sc around (19)
Rnd 9: sc around (19)
Rnd 10: sc around (19)
Rnd 11: sc around (19)
leg (make 2), black yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (5 sc, inc) x 3 (21)
Rnd 5: sc around (21)
Rnd 6: sc around (21)
Rnd 7: sc around (21)
Rnd 8: sc around (21)
Rnd 9: sc around (21)
Rnd 10: sc around (21)
Rnd 11: sc around (21)
Switch to black and white yarn for the wing.
wing (make 2), black and white yarn
Row 1: Ch 20, sc in 2nd ch from hook and across (19)
Row 2: Ch 1, turn, sc across (19)
Row 3: Ch 1, turn, sc across (19)
Row 4: Ch 1, turn, sc across (19)
Row 5: Ch 1, turn, sc across (19)
Row 6: Ch 1, turn, sc across (19)
Row 7: Ch 1, turn, sc across (19)
Row 8: Ch 1, turn, sc across (19)
Row 9: Ch 1, turn, sc across (19)
Row 10: Ch 1, turn, sc across (19)
Row 11: Ch 1, turn, sc across (19)
Switch to black yarn for the ear.
ear (make 2), black yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: (inc) x 2 (1 sc, inc) x 2 (10)
Rnd 3: sc around (10)
Rnd 4: sc around (10)
Rnd 5: sc around (10)
Rnd 6: (dec) x 2 (1 sc, dec) x 2 (6)
Switch to white yarn for the horn.
horn (make 3), white yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: (5 sc, inc) x 1 (7)
Rnd 3: sc around (7)
Rnd 4: sc around (7)
Rnd 5: sc around (7)
Rnd 6: sc around (7)
Rnd 7: sc around (7)
Rnd 8: (5 sc, dec) x 1 (6)
Rnd 9: fasten off, close hole (6)
Switch to black yarn for the tail.
tail, black yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: (5 sc, inc) x 1 (7)
Rnd 3: sc around (7)
Rnd 4: sc around (7)
Rnd 5: sc around (7)
Rnd 6: sc around (7)
Rnd 7: sc around (7)
Rnd 8: sc around (7)
Rnd 9: sc around (7)
Switch to black and white yarn for the eye.
eye (make 2), black and white yarn
Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.
If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.
If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.
Switch to white yarn for the nostril.
nostril (make 2), white yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: (2 sc, dec) x 6 (18)
Rnd 7: (1 sc, dec) x 6 (12)
Rnd 8: dec around (6)
Rnd 9: fasten off, close hole (6)
tooth (make 2), white yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: sc around (18)
Rnd 5: sc around (18)
Rnd 6: sc around (18)
Rnd 7: (1 sc, dec) x 6 (12)
Rnd 8: dec around (6)
Rnd 9: fasten off, close hole (6)
claw (make 8), white yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: sc around (6)
Rnd 3: fasten off, close hole (6)
Switch to black and white striped yarn for the neck.
neck, black and white striped yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (5 sc, inc) x 2 (14)
Rnd 4: sc around (14)
back, black and white striped yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: (2 sc, dec) x 6 (18)
Rnd 7: (1 sc, dec) x 6 (12)
Rnd 8: dec around (6)
Rnd 9: fasten off, close hole (6)
Switch to black yarn for the spine.
spine (make 12), black yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: sc around (12)
Rnd 4: sc around (12)
Rnd 5: sc around (12)
Rnd 6: dec around (6)
Rnd 7: fasten off, close hole (6)
wing bone (make 2), black yarn
Row 1: Ch 20, sc in 2nd ch from hook and across (19)
Row 2: Ch 1, turn, sc across (19)
Row 3: Ch 1, turn, sc across (19)
Row 4: Ch 1, turn, sc across (19)
Row 5: Ch 1, turn, sc across (19)
Row 6: Ch 1, turn, sc across (19)
Row 7: Ch 1, turn, sc across (19)
Row 8: Ch 1, turn, sc across (19)
Row 9: Ch 1, turn, sc across (19)
Row 10: Ch 1, turn, sc across (19)
Row 11: Ch 1, turn, sc across (19)
Fasten off, leaving long tail for sewing
tail tip, black yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: (5 sc, inc) x 1 (7)
Rnd 3: sc around (7)
Rnd 4: sc around (7)
Rnd 5: sc around (7)
Rnd 6: sc around (7)
Rnd 7: sc around (7)
Rnd 8: sc around (7)
Rnd 9: sc around (7)
Rnd 10: (5 sc, dec) x 1 (6)
Rnd 11: fasten off, close hole (6)
Final Stitch Counts
- head: 36 stitches at widest point
- body: 30 stitches at widest point
- belly: 24 stitches at widest point
- arm (x 2): 19 stitches at widest point
- leg (x 2): 21 stitches at widest point
- wing (x 2): 19 stitches at widest point
- ear (x 2): 10 stitches at widest point
- horn (x 3): 7 stitches at widest point
- tail: 7 stitches at widest point
- eye (x 2): See pattern
- nostril (x 2): 24 stitches at widest point
- tooth (x 2): 18 stitches at widest point
- claw (x 8): 6 stitches at widest point
- neck: 14 stitches at widest point
- back: 24 stitches at widest point
- spine (x 12): 12 stitches at widest point
- wing bone (x 2): 19 stitches at widest point
- tail tip: 7 stitches at widest point
Putting the Pieces Together
1. Stuff head, body, belly, neck firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.
2. Sew arm to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.
3. Sew leg to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.
4. Sew wing to the body. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.
5. Sew tail to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.
6. Sew wing bone to the body. Align the flat edge against the body and whipstitch along the seam. Leave the outer edge free for a natural, dimensional look.
7. Sew tail tip to the body. Align the flat edge against the body and whipstitch along the seam. Leave the outer edge free for a natural, dimensional look.
8. Sew ear to the sides of the head. Position just below the horns, angled outward at 45 degrees. Pin in place before sewing to check alignment from all angles. Use the long tail left for sewing and whipstitch around the base.
9. Sew horn to the top of the head. Position symmetrically, about 1 cm apart, angled slightly outward. Pin in place before sewing to check alignment from all angles. Use the long tail left for sewing and whipstitch around the base.
10. Attach eye to the head. Position on the upper half of the head, below the horns, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.
11. Sew nostril in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
12. Sew tooth in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
13. Sew claw in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
14. Sew back in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
15. Sew spine in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
16. Sew wing bone in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
17. Sew tail tip in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
18. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.
Care Tips for Your Finished Amigurumi
These tips will help you crochet a clean, well-finished amigurumi doll:
- Stitch markers: Mark the first stitch of every round and you will never lose count again.
- Block flat pieces: Lightly steam any flat components before assembly, they will line up much better.
- Carry, don't cut: When changing colors within a piece, carry the unused yarn inside to minimize end-weaving.
- Embroider the details: Safety eyes aren't your only option. Embroidered features give a softer, handmade feel.
- Pin before sewing: Use sewing pins to position parts before attaching. Adjust until the shape looks right, then sew.
- Smaller hook = neater result: If stuffing peeks through, drop one hook size. Tight stitches look professional.
Caring for your dragon amigurumi:
- Hand wash in cool water with mild detergent, no machine washing.
- Air dry flat, away from direct sunlight. Sun fades colors faster than you think.
- If safety eyes are used, ensure they are locked tight, not suitable for children under 3.
- Spot clean small stains with a damp cloth instead of washing the whole piece.
Your Questions, Answered
Safety eyes or embroidered eyes?
Both work. Safety eyes look more polished but aren't safe for babies. Embroidered eyes are softer and baby-safe.
Can I sell finished items from this pattern?
Absolutely. Sell at craft fairs, online, wherever you like, just don't distribute the pattern itself.
What yarn works best?
Cotton gives the crispest stitches and most defined shape. Acrylic is softer and more affordable, both work great.
How long does this take?
Most crocheters finish in 2-4 hours. Your first one will be slower, and that's completely normal.
Can I resize it?
Yes, use a smaller hook and thinner yarn for a mini, or go up in hook size and yarn weight for a larger version. The proportions stay the same.
My stitches are too loose and stuffing shows, help?
Drop down one hook size. Tight, even stitches are the single most important thing for clean amigurumi.
More Free Patterns to Try
Love this pattern? Check out more free crochet patterns: