Charcoal Grey Arctic Hare Amigurumi Pattern With Tail

Finished Charcoal Grey Arctic Hare handmade crochet piece, front showcase view
Finished Charcoal Grey Arctic Hare handmade crochet project, front view

Why This Pattern Works

I crocheted this charcoal grey arctic hare on a 4.0 mm hook with worsted weight yarn, and the fabric came out dense enough to hold its shape without fighting the hook. The finished hare stands about 8.5 in (22 cm) tall and measures roughly 3.5 in (9 cm) across. That height comes mostly from the ears and the long body, so the proportions read as a sitting hare rather than a round blob. I kept my tension even through the rounds, especially where the head curves toward the snout, because that transition decides whether the face looks alert or squashed.

The head and body are separate pieces, both worked in rounds. I stuffed each one firmly before sewing the head to the body during assembly, which lets you adjust the neck join and keep the hare sitting upright. Arms and legs are also worked in rounds, and the ears are crocheted in rounds while the inner ears are worked in rows, giving that flatter inset shape. The snout and tail are small round pieces, and the eyes and snowflake are finishing and embroidery details rather than separate crocheted parts. I like the assembly stage most on this build, when the head settles onto the stuffed body and the silhouette finally locks into place.

This is an intermediate pattern. You will use basic shaping, increases and decreases, and some simple embroidery, but nothing beyond that. The charcoal grey hides small tension shifts well, though I still recommend counting your rounds on the legs and ears so they match. Once finished, the hare sits nicely on a bookshelf, a child's dresser, or inside a gift bag for someone who likes cold-weather animals. I allow you to sell the arctic hares you crochet from this pattern, but you may not resell or redistribute the pattern or its sheets.

Pattern Notes

Pattern at a glance: 12 pieces to crochet. Components and details - head, body, arm, leg, ear, inner ear, snout, tail, eye and snowflake - worked in 67 rounds and rows to about 8.5 in (22 cm) tall in Worsted weight with a 4.0 mm hook.

I build the hare from separate crocheted parts: head, body, two arms, two legs, two ears, two inner ears, snout, and tail. The head and body are made in rounds as separate pieces. During assembly, after both are stuffed, I sew the head to the body. That join is the moment the hare starts to read as one animal, and it is worth taking time over. The separate pieces let me shape each part and check the ears and limbs before the final join. The arms, legs, ears, snout, and tail are also made in rounds, while the inner ears are worked in rows. Facial embroidery, safety eyes, and the snowflake are finishing or embroidery details, not separate crocheted pieces. You may sell hares you make; the pattern and sheets may not be resold or redistributed.

The palette stays to charcoal, grey, and black. I use the quieter contrast to keep the snout, inner ears, eyes, and snowflake readable without making the hare high-contrast. A smooth, tightly spun yarn keeps the round changes readable and helps the separate head and body hold shape before assembly. A fuzzier yarn softens the surface but can blur the shaping and make the neck join harder to read. With a 4.0 mm hook, the finished hare is approximately eight and a half inches (22 centimeters) tall and 3.5 in (9 cm) wide. If you swap in a different yarn, check your stitch tension so the proportions stay close.

The pitfall on this build is the neck join. Because the head and body are separate pieces, it is easy to sew the head slightly off-center or to leave a gap where the two stuffed shapes meet. I check the head from the front, side, and back before the seam is closed, and I keep the sewing tension even rather than pulling the join tight in one pass. Stuff both pieces first, then add final stuffing adjustments before sewing the head to the body.

What You'll Need

Finished Size: Approximately 8.5 in (22 cm) tall and 3.5 in (9 cm) wide

Skill Level: Intermediate

Estimated Time: 6-9 hours

Hook Size: 4.0 mm

Yarn: Worsted yarn

MaterialDetails
YarnWorsted: charcoal 62 m (68 yd), grey 11 m (13 yd), black 2 m (3 yd). Total about 75 m (83 yd).
Hook4.0 mm crochet hook
StuffingPolyfill or fiberfill
EyesSafety eyes or embroidery thread
ExtrasTapestry needle, locking stitch marker, sewing pins for positioning, sharp snips

Gauge: Approximately 12 sc x 14 rounds = 4 inches with 4.0 mm hook. If gaps appear between stitches when stuffing the Charcoal Grey Arctic Hare, switch to a slightly smaller hook for a cleaner finish.

Charcoal Grey Arctic Hare, sheet 1: materials and yarn, stitch abbreviations, instructions for head
Sheet 1 of 5 shows materials and yarn, stitch abbreviations, instructions for head.

Stitches & Abbreviations

Note: All stitches for this Charcoal Grey Arctic Hare follow US crochet terminology. For this Charcoal Grey Arctic Hare, I work the main pieces in continuous rounds unless a section specifies turned rows, and I move my stitch marker up at the start of every round.

AbbreviationMeaning
scSingle crochet
incIncrease (2 sc in same stitch)
decDecrease (sc 2 together)
chChain
Charcoal Grey Arctic Hare, sheet 2: instructions for arm, body, leg, project views
Sheet 2 of 5 shows instructions for arm, body, leg, project views.

Pattern Instructions

Technique Focus For This Project

Highlighted construction steps for this build: Joining the Stuffed Head to the Body, Attaching Limbs and Shaping Ears, Snout, Eyes, and Snowflake Finishing.

Joining the Stuffed Head to the Body

  1. Stuff the head and body firmly with polyfill, shaping small handfuls as you go so the neck edge stays even.
  2. Pin center front, center back, and both sides where the 34-stitch head meets the 28-stitch body.
  3. Check the profile from three angles before stitching; adjust pins until the head sits upright without tilting.

Attaching Limbs and Shaping Ears

  1. Stuff the 10-stitch arms and 12-stitch legs lightly so they stay flexible; match both sides before sewing.
  2. Pin arms below the neck join and angled outward; check front symmetry before whipstitching each 10-stitch arm base.
  3. Position the 12-stitch legs at the body base, spaced evenly, then pin and check side balance before stitching.

Snout, Eyes, and Snowflake Finishing

  1. Lightly stuff the 9-stitch grey snout, then pin it centered below the eye line before whipstitching the perimeter.
  2. Place safety eyes on the upper head about one eye-width apart, or embroider two black satin stitches.
  3. Pin the snowflake placement on the body first, then work 6-8 mm grey satin or straight stitches evenly.

Assembly

1. For this arctic hare, if I use safety eyes, I insert them through the head and lock both washers on the inside before closing the opening. Embroidered eyes can be added later.

2. Stuff charcoal head, charcoal body firmly with polyfill. I mould the stuffing in the charcoal head and charcoal body with my fingers while the openings are still open. I add more stuffing in the center of the charcoal head and body to make them rounded, and I use less stuffing near the edges so they taper.

3. I stuff the charcoal arms and charcoal legs lightly with polyfill, using about half the stuffing density I use for the body so each limb sits naturally. Check that both sides match before closing or sewing.

4. Sew head to the body. I pin the head to the body first, turn it to check the balance from the side and front, and sew a clean seam around the edge. I pull each whipstitch snug so the head-to-body join sits flush, then I push the yarn end deep into the stuffing.

5. I sew the arms to the upper sides of the body, just under the neck join, angling each arm slightly outward. I pin the arms symmetrically to both upper sides of the body, check them from the front, and then sew them firmly with a whipstitch.

6. I sew the charcoal grey hare’s legs to the base of the body so they match in symmetry and support the body’s weight, pin them in place, check that the front and flanks sit level, and close neatly around each hip edge.

7. I sew the tail to the lower back of the body, set straight along the base of the back spine to work as a rear stabilizer; I pin it in place to check the lift angle, then stitch neatly around the contact ring.

8. Attach snowflake by embroidering directly onto the body with grey yarn or embroidery floss, marking balanced placement with pins first. Form neat satin or straight stitches and weave the tails inside.

9. Sew ear to the sides of the head. Set high on the side slopes of the crown so they angle naturally away from the centerline. Fix left and right with sewing pins while viewing face-on so neither sits low, then seam cleanly round the root.

10. Sew inner ear to the sides of the head. Set high on the side slopes of the crown so they angle naturally away from the centerline. Fix left and right with sewing pins while viewing face-on so neither sits low, then seam cleanly round the root.

11. Sew snout to the front of the head. I center the snout beneath the midpoint between the eyes on the front of the head, plump it lightly with polyfill before the final stitches, and sew small whipstitches around its border.

12. Attach eye to the head. I place the eyes symmetrically above the middle of the face, leaving about one eye-width between the left and right centers. Secure firmly with embroidery thread or fabric glue. I embroider a small line below each eye of the charcoal grey Arctic hare to make its look more expressive.

13. For this charcoal grey hare, I embroider the mouth as a small curved line below the eyes using black or dark brown thread.

14. Check all seams are secure. Give each join a soft pull and see whether it holds. Trim the ends flush, with scissors that actually cut. I weave in all remaining tails on this charcoal grey Arctic hare with a needle, passing through at least 3 stitches in each direction so they don’t unravel. I press the charcoal grey Arctic hare gently from every side so the stuffing evens out.

Charcoal Grey Arctic Hare, sheet 5: stitch count table, assembly and finishing, project views
Sheet 5 of 5 shows stitch count table, assembly and finishing, project views.

Tips & Care

How firmly you stuff this charcoal grey arctic hare shapes its silhouette more than anything else: pack firmly for a display piece, or lighter for a soft gift.

My bench notes for the Charcoal Grey Arctic Hare use a 4.0 mm hook. The head and body are separate pieces, stuffed before assembly. The eyes and snowflake are finishing work, not separate crocheted parts. You may sell finished hares; the written pattern and sheets may not be resold or redistributed.

  • I mark the first stitch of every round on the head, body, arms, legs, ears, snout, and tail because these pieces are worked in rounds and the start spirals; a marker left in one spot makes paired parts end up different lengths.
  • Before joining the stuffed head and body, I pin center front, center back, and both sides, then check the profile; skipping this lets the head tilt or the neck seam pucker when I whipstitch.
  • Inner ears are worked in rows, so their edges curl; I pin them to a foam mat and hover steam from a distance, never pressing a hot iron onto the yarn, so each piece dries flat and fits the ear cleanly.
  • I stuff the head and body firmly but not rock-hard before assembly, adding small handfuls and shaping as I go; an overfilled neck bulges at the seam, while a soft body lets the head droop.
  • I check gauge over the first few rounds with the 4.0 mm hook; if the fabric shows gaps when stretched, I tighten tension because loose rounds let polyfill peek through later.
  • For the face, I pin both eye positions and the snowflake placement before stitching, then work equal-length stitches on both sides and bury each end; this keeps the expression level and stops surface threads from pulling.
  • Cheek color is optional; I dab dry cosmetic blush with a swab after assembly, which changes the surface tone without another yarn color, and I keep the piece dry.

I wash only when needed and check the safety-eye backs and embroidery first.

  • Wash by hand in lukewarm water with mild soap, supporting the head and body so the stuffed shapes do not stretch.
  • Rinse by pressing water through the piece, not lifting it by one arm or ear, since a wet arm can pull the assembly seam.
  • Roll it in a towel and press out the water; never wring, because twisting shifts the polyfill and distorts the neck join.
  • Air dry flat away from direct sun, patting head, body, and ears into shape while damp; sunlight fades the charcoal grey.
  • Store loosely in a breathable bag away from damp and heavy items, leaving the ears unpressed so they hold shape.

FAQ

Can I sell the Charcoal Grey Arctic Hare I make?

You may sell the finished items you crochet. The written pattern and visual sheets may not be resold or redistributed.

How much of each yarn colour goes into the hare?

With a 4.0 mm hook, the main charcoal sections take about 62 m (68 yd), grey accents about 11 m (13 yd), and black details about 2 m (3 yd). That totals roughly 75 m (83 yd) for the head, body, two arms, two legs, two ears, two inner ears, snout, tail, two eyes and snowflake. I keep the black for the eyes and snowflake so the grey inner ears and snout stay distinct.

How do I get the ears and tail to sit neatly after crocheting?

I pin the ear pieces flat on a foam mat and hover steam gently from a distance, never pressing a hot iron onto the yarn, so the curves hold. For the tail, I attach it low on the back after the body is stuffed, checking the hare sits level from the side. The two inner ears are pinned in place before stitching so both sides match.

Can I give the hare a softer expression without changing yarn colours?

Yes. I lightly dust dry cosmetic blush onto the cheeks with a swab or dry brush, building colour slowly rather than switching yarn. For the face, I pin the eye positions first, then work equal-length black stitches on both sides and bury each end. Keep the snout simple so the charcoal body stays the focus.

Can I resize the Charcoal Grey Arctic Hare?

You can resize it, but treat that as a new project rather than a simple hook swap. The design is built for worsted yarn and a 4.0 mm hook, so changing either shifts the finished figure; compare the head, body, limbs, ears, and snout as you work and adjust the assembly fit before sewing. Keep notes on round and row counts, since the head, body, arms, legs, ears, snout, and tail use rounds while the inner ears use rows.

Any tips for the face and snowflake finishing?

Use the black or grey thread from the palette for facial embroidery, and pin the paired eye positions first so both sides match. Work equal-length stitches on each side, then bury each end. The eyes and snowflake are finishing or embroidery instructions, not separate crocheted pieces.

Advertisements