Green Dinosaur Amigurumi Crochet Pattern

Why This Pattern Is Worth Your Time

Meet your new prehistoric pal, a friendly green dinosaur worked up in soft worsted yarn with a 4 mm hook. The finished figure stands about 10 inches tall and 7 inches wide, a comfortable size for small hands to cradle or for a shelf to display. Every round is built from simple single crochet stitches, so even if you have only a handful of amigurumi projects behind you, you can follow along without breaking a sweat.

You will work in continuous spirals, shaping the rounded belly first, then the stubby legs, the chunky tail, and finally the gentle curve of the neck and head. A few rows of even tension create that smooth, squishy texture amigurumi is loved for, while light stuffing gives the body a firm but huggable feel. Small back loops and straightforward increases form the tiny arms and the pointed ridge along the back, adding just enough character without any tricky techniques. With a basic hook, a single skein of yarn, and a little patience, this little dinosaur comes together in a satisfying weekend project.

Gather These Supplies First

Material	Details
Yarn	worsted yarn in green, yellow, brown, black
Hook	4 mm crochet hook
Stuffing	Polyfill or fiberfill
Eyes	Safety eyes or embroidery thread
Extras	Yarn needle, stitch markers, scissors

Gauge: Approximately 12 sc x 14 rounds = 2 inches with 4 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.

Stitches and Abbreviations Used

Note: This pattern uses US crochet terms. All rounds are worked in continuous rounds unless stated otherwise. Use a stitch marker in the first stitch of each round.

Abbreviation	Meaning
sc	Single crochet
inc	Increase (2 sc in same stitch)
dec	Decrease (sc 2 together)

Let's Make It: Instructions

head, green yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (3 sc, inc) x 6 (30)

Rnd 6: sc around (30)

Rnd 7: sc around (30)

Rnd 8: (3 sc, dec) x 6 (24)

Rnd 9: (2 sc, dec) x 6 (18)

Rnd 10: (1 sc, dec) x 6 (12)

Rnd 11: dec around (6)

Rnd 12: fasten off, close hole (6)

Switch to yellow yarn for the snout.

snout, yellow yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: sc around (12)

Rnd 4: sc around (12)

Rnd 5: sc around (12)

Rnd 6: dec around (6)

Rnd 7: fasten off, close hole (6)

Switch to green yarn for the body.

body, green yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (11 sc, inc) x 2 (26)

Rnd 6: sc around (26)

Rnd 7: sc around (26)

Rnd 8: sc around (26)

Rnd 9: sc around (26)

Rnd 10: sc around (26)

Rnd 11: (11 sc, dec) x 2 (24)

Rnd 12: (2 sc, dec) x 6 (18)

Rnd 13: (1 sc, dec) x 6 (12)

Rnd 14: dec around (6)

Rnd 15: fasten off, close hole (6)

Switch to brown yarn for the spikes.

spikes (make 6), brown yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

Switch to green yarn for the legs.

legs (make 4), green yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: sc around (18)

Rnd 5: sc around (18)

Rnd 6: sc around (18)

Rnd 7: sc around (18)

Rnd 8: sc around (18)

Rnd 9: sc around (18)

Rnd 10: sc around (18)

Rnd 11: sc around (18)

Rnd 12: (1 sc, dec) x 6 (12)

Rnd 13: dec around (6)

Rnd 14: fasten off, close hole (6)

Switch to black yarn for the eyes.

eyes (make 2), black yarn

Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.

If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.

If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.

nostrils (make 2), black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

Switch to yellow yarn for the belly.

belly, yellow yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (3 sc, inc) x 2 (4 sc, inc) x 2 (22)

Rnd 5: sc around (22)

Rnd 6: sc around (22)

Rnd 7: (3 sc, dec) x 2 (4 sc, dec) x 2 (18)

Rnd 8: (1 sc, dec) x 6 (12)

Rnd 9: dec around (6)

Rnd 10: fasten off, close hole (6)

Switch to green yarn for the arm.

arm (make 2), green yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 3 (2 sc, inc) x 2 (17)

Rnd 4: sc around (17)

Rnd 5: sc around (17)

Rnd 6: sc around (17)

Rnd 7: sc around (17)

Rnd 8: sc around (17)

Rnd 9: sc around (17)

Rnd 10: sc around (17)

Rnd 11: sc around (17)

tail, green yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: sc around (6)

Rnd 3: sc around (6)

Rnd 4: sc around (6)

Rnd 5: sc around (6)

Rnd 6: sc around (6)

Rnd 7: sc around (6)

Rnd 8: sc around (6)

Rnd 9: sc around (6)

ear (make 2), green yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (2 sc, inc) x 2 (8)

Rnd 3: sc around (8)

Rnd 4: sc around (8)

Rnd 5: sc around (8)

Rnd 6: (2 sc, dec) x 2 (6)

Rnd 7: fasten off, close hole (6)

Switch to yellow yarn for the muzzle.

muzzle, yellow yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (1 sc, inc) x 3 (9)

Rnd 3: sc around (9)

Rnd 4: (1 sc, dec) x 3 (6)

Rnd 5: fasten off, close hole (6)

Switch to black yarn for the nose.

nose, black yarn

Embroider the nose with black thread after the eyes are placed.

Work a small triangular satin stitch centered between the eyes, about 8 mm wide.

How to Assemble the Finished Parts

1. Stuff head, body, belly firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.

2. Sew snout to the front of the head. Center between the eyes, slightly below the eye line. Stuff lightly with polyfill before closing for a 3D effect. Pin in place before sewing to check alignment from all angles.

3. Attach eyes to the head. Position on the upper half of the head, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.

4. Sew ear to the sides of the head. Position on the upper sides of the head, angled outward. Pin in place before sewing to check alignment from all angles. Use the long tail left for sewing and whipstitch around the base.

5. Sew muzzle to the front of the head. Center between the eyes, slightly below the eye line. Stuff lightly with polyfill before closing for a 3D effect. Pin in place before sewing to check alignment from all angles.

6. Embroider the nose with black thread centered between the eyes. Work a small triangular satin stitch about 8 mm wide.

7. Sew legs to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.

8. Sew arm to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.

9. Sew tail to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.

10. Sew spikes in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

11. Sew nostrils in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

12. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.

Tips for a Perfect Finish and Care

This little green dinosaur is a fun project for anyone just starting out with amigurumi. The simple shape and basic stitches make it a great way to practice your skills while creating a charming toy. Grab your 4 mm hook and some yarn, and enjoy bringing this friendly creature to life stitch by stitch.

• Use stitch markers to mark the first stitch of every round so you can easily find your place and keep your rounds even.
• Keep your tension well and consistent so the stitches sit nicely together and the stuffing does not show through any gaps.
• Stuff the dinosaur firmly as you go, adding small amounts of fiberfill before closing each section to keep the shape beautifully rounded.
• Place a stitch marker in the last stitch of each round to help you count your increases and decreases accurately.
• Use simple decreases by working two stitches together, which is easy to learn and works nicely for shaping the head and body.
• Check your gauge by making a small swatch so your stitches are the right size and your finished dinosaur holds its shape well.

Taking good care of your dinosaur will keep it looking its best for many playtimes to come. Follow these simple steps to clean and store your finished toy safely.

• Hand wash gently in cool water with a mild soap, then squeeze out extra water without wringing the piece.
• Air dry flat on a clean towel so the shape stays nicely formed and no part of the dinosaur stretches out.
• Avoid leaving the toy in direct sunlight for long periods, as the green color can fade over time.
• Spot clean small marks with a damp cloth and a little soap to keep the surface fresh between full washes.

Good to Know: Reader Questions

What skill level is this pattern?

This pattern is rated Beginner, so it uses basic stitches like single crochet and simple increases and decreases. No advanced techniques are needed.

What yarn and hook do I need?

You will need worsted weight yarn and a 4 mm crochet hook. Any worsted yarn in green will work well for the dinosaur body.

How long will it take to make?

Most crocheters finish this amigurumi in 2-4 hours. The exact time depends on your pace and experience.

Can I sell finished items made from this pattern?

Yes, you may sell finished dinosaurs made from this pattern. Please credit the designer when listing them online or at craft fairs.

Can I make the dinosaur bigger or smaller?

Yes. To resize, simply use a thicker or thinner yarn with a matching hook size. The stitches and shaping stay the same, so the project remains beginner-friendly.

Explore More Free Crochet Patterns

Love this pattern? Check out more free crochet patterns:

• Panda Amigurumi Crochet Pattern For Doll Making
• Bear Ear Flap Hat Crochet Pattern For Cozy Winter Wear
• German Shepherd Dog Amigurumi Crochet Pattern
• Woody Amigurumi Doll Crochet Pattern
• Bear Amigurumi Crochet Pattern For Cozy Plush Making