Coca Cola Bottle Amigurumi For Soda Lovers And Collectors

Reasons You'll Enjoy Making This

This Coca-Cola bottle amigurumi is a toy worked in black, red, gray, and white. You will crochet the bottle body, label band, bottle cap, logo embroidery, bottle neck, neck ring, and the label. The pattern walks through each piece with clear round-by-round counts, then shows how to assemble and finish everything so the result matches the reference photos.

Use the pattern card as your material checklist before starting. The instructions include embroidery detail. It stands upright on its own. The instructions include brand logo detail. Keep your tension even, count stitches at the end of shaping rounds, and check the placement notes before sewing pieces together for a clean handmade result.

Quick Notes for Success

This Coca-Cola bottle amigurumi is a nostalgic, recognizable piece that works beautifully as a shelf display, a gift for collectors of soda memorabilia, or a playful accent for a kitchen or diner-themed décor. The shape is iconic enough that the finished toy reads instantly from across the room, yet the construction is approachable enough to keep an experienced crocheter engaged without feeling repetitive. If you enjoy projects that blend pop culture with handmade craft, this bottle is a satisfying build, and it scales nicely if you ever want to make a matching six-pack of mini bottles for a party center piece.

For yarn choice, a worsted weight acrylic in classic Coca-Cola red works wonderfully and gives the bottle its signature glossy, saturated look, while a cotton blend offers slightly better stitch definition if you want the contour lines to pop. A small amount of white yarn is needed for the wave logo and the cap band, and a touch of gold or yellow handles the cap detail. Because the finished piece measures approximately 10 inches (25 cm) tall and 7 inches (18 cm) wide, worsted weight paired with a 4 mm hook produces a sturdy fabric that holds the bottle shape without excessive stuffing showing through. If you prefer a slightly slouchier, more huggable feel, go down half a hook size; if you want a firmer, display-quality finish, stay with the recommended 4 mm and stuff firmly as you go.

One common pitfall on this project is letting the neck of the bottle narrow too quickly, which makes the white wave band and cap look squished and out of pro portion. To avoid this, follow the decrease rounds precisely at the shoulder and stop decreasing one or two rounds earlier than feels natural, then use a few shaping rows or a brief round of even stitching to set the neck height before adding the cap. decreases keeps the color changes clean and prevents the red from showing through the white logo, so take the extra second to work each

Materials and Supplies You'll Need

Material	Details
Yarn	worsted yarn in black, red, gray, white
Hook	4 mm crochet hook
Stuffing	Polyfill or fiberfill
Eyes	Safety eyes or embroidery thread
Extras	Yarn needle, stitch markers, scissors

Gauge: Approximately 12 sc x 14 rounds = 4 inches with 4 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.

Stitches and Abbreviations Used

Note: This pattern uses US crochet terms. All rounds are worked in bottom-up unless stated otherwise. Use a stitch marker in the first stitch of each round.

Abbreviation	Meaning
sc	Single crochet
inc	Increase (2 sc in same stitch)
dec	Decrease (sc 2 together)
sl st	Slip stitch
ch	Chain

How to Crochet This Pattern

bottle body, black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (3 sc, inc) x 6 (30)

Rnd 6: sc around (30)

Rnd 7: sc around (30)

Rnd 8: (3 sc, dec) x 6 (24)

Rnd 9: (2 sc, dec) x 6 (18)

Rnd 10: (1 sc, dec) x 6 (12)

Rnd 11: (4 sc, dec) x 2 (10)

Rnd 12: (3 sc, dec) x 2 (8)

Rnd 13: (2 sc, dec) x 2 (6)

Rnd 14: fasten off, close hole (6)

Switch to red yarn for the label band.

label band, red yarn

Row 1: Ch 7, sc in 2nd ch from hook and across (6)

Row 2: Ch 1, turn, sc across (6)

Row 3: Ch 1, turn, sc across (6)

Row 4: Ch 1, turn, sc across (6)

Switch to gray yarn for the bottle cap.

bottle cap, gray yarn

Rnd 1: Ch 23, join with sl st to form ring, sc in each ch around (22)

Rnd 2: sc around (22)

Rnd 3: sc around (22)

Rnd 4: sc around (22)

Rnd 5: sc around (22)

Rnd 6: sc around (22)

Rnd 7: sc around (22)

Fasten off. Do not stuff.

Switch to white yarn for the logo embroidery.

logo embroidery, white yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (2 sc, inc) x 2 (8)

Rnd 3: sc around (8)

Rnd 4: sc around (8)

Rnd 5: sc around (8)

Rnd 6: (2 sc, dec) x 2 (6)

Rnd 7: fasten off, close hole (6)

Switch to black yarn for the bottle neck.

bottle neck, black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (2 sc, inc) x 2 (8)

Rnd 3: sc around (8)

Rnd 4: (2 sc, dec) x 2 (6)

Rnd 5: sc around (6)

Rnd 6: fasten off, close hole (6)

Switch to red yarn for the neck ring.

neck ring, red yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: sc around (12)

Rnd 4: sc around (12)

Rnd 5: dec around (6)

Rnd 6: fasten off, close hole (6)

label, red yarn

Row 1: Ch 7, sc in 2nd ch from hook and across (6)

Row 2: Ch 1, turn, sc across (6)

Row 3: Ch 1, turn, sc across (6)

Row 4: Ch 1, turn, sc across (6)

Fasten off, leaving long tail for sewing

Assembling Your Amigurumi

1. Stuff bottle body, bottle neck firmly with polyfill. Shape the stuffing as you go, pressing and molding to create a natural form. Add extra stuffing to the center for a rounded shape, less near the edges for a tapered look.

2. Add facial details: embroider eyes with black thread using satin stitch. Position them on the upper half of the head, about one eye-width apart. Add a small embroidered mouth below the eyes using a single curved stitch.

3. Sew label band in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

4. Sew bottle cap in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

5. Sew logo embroidery in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

6. Sew neck ring in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

7. Sew label in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

8. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.

Helpful Tips and Cleaning Advice

This Coca-Cola bottle amigurumi is worked in the round with a 4 mm hook, so the following practical tips will help you keep your stitch definition tight, your shaping even, and your finished toy looking well finished at an intermediate skill level.

• Place a stitch marker in the first stitch of every round and move it up at the start of each new round, because the red and white color changes can make it hard to tell where round one ended once the spiral grows.
• Use decreases instead of standard two-together decreases on every shaping round, since the smooth decrease keeps the red surface free of small holes and helps the bottle keep a clean cylindrical silhouette.
• Maintain even tension throughout the body, because loose stitches will let the white stuffing show through the red yarn and spoil the crisp Coca-Cola label effect you are aiming for.
• Stuff the bottle firmly but not rock hard, adding small amounts of fiberfill at a time and shaping it with the back of your hook so the neck, shoulders, and base all read as well defined curves rather than lumpy bulges.
• Work the white label panel in the stitch detail after the body is complete and stuffed, which lets you place the logo band exactly where it looks balanced and avoids carrying white yarn through every red round.
• When joining the cap to the neck, slip stitch through both layers with the 4 mm hook so the join is secure enough for play but still allows the cap to sit nicely without wobbling.
• Check your gauge on the first few rounds by measuring the diameter against a real bottle, because a 4 mm hook with the recommended yarn should give a tight fabric that fully conceals the stuffing.
• Weave in ends with a needle along the inside of the color-change line, since the contrast between red and white will make any loose tail visible on the outside of the finished toy

  Quick Answers for Makers

  

  What yarn and hook do I need for the Coca-Cola bottle amigurumi?

  You'll need worsted weight yarn in classic Coca-Cola red, white, and a small amount of black for the label details. A 4 mm crochet hook works nicely with worsted weight yarn to create tight, defined stitches that prevent the stuffing from showing through. Choose an acrylic or cotton blend for easy care and stitch definition.

  How long does it take to crochet the Coca-Cola bottle amigurumi?

  The time for this project is 2-4 hours, depending on your crochet speed and how much time you spend on the label embroidery. Most crocheters complete the main bottle shape in about 90 minutes, then spend the remaining time on the cap, label, and assembly. Working in shorter sessions can stretch the project across a weekend.

  Is the Coca-Cola bottle amigurumi pattern suitable for beginners?

  This pattern is rated Intermediate, so some experience with amigurumi basics like magic rings, single crochet, and decreases is helpful. The color changes for the white label band and the the stitch detail detail on the logo require a bit of patience. If you've completed a few simple amigurumi projects before, you should be able to tackle this one successfully.

  Can I sell finished Coca-Cola bottle amigurumi made from this pattern?

  Yes, you are welcome to sell finished items made from this pattern at craft fairs, online shops, or local markets. We do ask that you credit the pattern designer in your listings and refrain from mass-producing the items for large wholesale orders. Please note that the Coca-Cola name and logo are trademarks, so consider marketing them as "soda bottle amigurumi" or "cola bottle plushies" to avoid trademark issues.

  Can I resize the Coca-Cola bottle amigurumi

  More Amigurumi Ideas You'll Love

  Love this pattern? Check out more free crochet patterns:

  • Gingerbread Man Amigurumi For Christmas Tree Ornaments
  • Totoro Amigurumi For Studio Ghibli Fans And Collectors
  • Dalmatian Dog Amigurumi For Nursery Shelf Display
  • Football Player Amigurumi For Sports Fan Gifts
  • Black Bull Amigurumi For Taurus Zodiac Gifts