Archer Amigurumi For Kids
Finished Size: Approximately 10 inches (25 cm) tall and 7 inches (18 cm) wide
Skill Level: Intermediate
Estimated Time: 2-4 hours
Hook Size: 3.5 mm
Yarn: DK yarn
Notions: Yarn needle, stitch marker, polyfill
Gauge: Approximately 16 sc x 20 rounds = 4 inches with 3.5 mm hook
Why Crocheters Love This Design
This archer amigurumi is an amigurumi doll worked in beige, light blue, red, and orange. You will crochet the head, body, flame hat, arm, leg, boot, eye, eyebrow, nose, bow, arrow, quiver, belt, and the strap. The pattern walks through each piece with clear round-by-round counts, then shows how to assemble and finish everything so the result matches the reference photos.
Use the pattern card as your material checklist before starting. Safety eyes give a polished look. It stands upright on its own. The instructions include embroidered eyebrows. Keep your tension even, count stitches at the end of shaping rounds, and check the placement notes before sewing pieces together for a clean handmade result.
A Few Notes Before We Begin
Your Supply List
| Material | Details |
|---|---|
| Yarn | DK yarn in beige, light blue, red, orange, yellow, brown, black |
| Hook | 3.5 mm crochet hook |
| Stuffing | Polyfill or fiberfill |
| Eyes | Safety eyes or embroidery thread |
| Extras | Yarn needle, stitch markers, scissors |
Gauge: Approximately 16 sc x 20 rounds = 4 inches with 3.5 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.
Crochet Stitches in This Pattern
Note: This pattern uses US crochet terms. All rounds are worked in continuous rounds unless stated otherwise. Use a stitch marker in the first stitch of each round.
| Abbreviation | Meaning |
|---|---|
| sc | Single crochet |
| inc | Increase (2 sc in same stitch) |
| dec | Decrease (sc 2 together) |
| sl st | Slip stitch |
| ch | Chain |
The Full Pattern, Step by Step
head, beige yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: (3 sc, inc) x 6 (30)
Rnd 6: sc around (30)
Rnd 7: sc around (30)
Rnd 8: (3 sc, dec) x 6 (24)
Rnd 9: (2 sc, dec) x 6 (18)
Rnd 10: (1 sc, dec) x 6 (12)
Rnd 11: dec around (6)
Rnd 12: fasten off, close hole (6)
Switch to light blue yarn for the body.
body, light blue yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: (11 sc, inc) x 2 (26)
Rnd 6: sc around (26)
Rnd 7: sc around (26)
Rnd 8: sc around (26)
Rnd 9: sc around (26)
Rnd 10: sc around (26)
Rnd 11: (11 sc, dec) x 2 (24)
Rnd 12: (2 sc, dec) x 6 (18)
Rnd 13: (1 sc, dec) x 6 (12)
Rnd 14: dec around (6)
Rnd 15: fasten off, close hole (6)
Switch to multi-color yarn for the flame hat.
flame hat, multi-color yarn
Rnd 1: Ch 24, join with sl st to form ring, sc in each ch around (23)
Rnd 2: sc around (23)
Rnd 3: sc around (23)
Rnd 4: sc around (23)
Rnd 5: sc around (23)
Rnd 6: sc around (23)
Rnd 7: sc around (23)
Rnd 8: sc around (23)
Rnd 9: sc around (23)
Fasten off. Do not stuff.
Switch to beige yarn for the arm.
arm (make 2), beige yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 3 (2 sc, inc) x 2 (17)
Rnd 4: sc around (17)
Rnd 5: sc around (17)
Rnd 6: sc around (17)
Rnd 7: sc around (17)
Rnd 8: sc around (17)
Rnd 9: sc around (17)
Rnd 10: sc around (17)
Rnd 11: sc around (17)
Switch to light blue yarn for the leg.
leg (make 2), light blue yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: sc around (18)
Rnd 5: sc around (18)
Rnd 6: sc around (18)
Rnd 7: sc around (18)
Rnd 8: sc around (18)
Rnd 9: sc around (18)
Rnd 10: sc around (18)
Rnd 11: sc around (18)
Switch to brown yarn for the boot.
boot (make 2), brown yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: (1 sc, inc) x 3 (9)
Rnd 3: sc around (9)
Rnd 4: sc around (9)
Rnd 5: (1 sc, dec) x 3 (6)
Rnd 6: fasten off, close hole (6)
Switch to black yarn for the eye.
eye (make 2), black yarn
Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.
If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.
If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.
eyebrow (make 2), black yarn
Embroider this facial detail with black thread after the head is closed.
Use short straight stitches or satin stitch, keeping the line light and curved so it sits naturally above the eye.
Switch to beige yarn for the nose.
nose, beige yarn
Embroider the nose with black thread after the eyes are placed.
Work a small triangular satin stitch centered between the eyes, about 8 mm wide.
Switch to brown yarn for the bow.
bow, brown yarn
Row 1: Ch 8, sc in 2nd ch from hook and across (7)
Row 2: Ch 1, turn, sc across (7)
Row 3: Ch 1, turn, sc across (7)
Switch to light blue yarn for the arrow.
arrow, light blue yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: sc around (18)
Rnd 5: sc around (18)
Rnd 6: sc around (18)
Rnd 7: sc around (18)
Rnd 8: sc around (18)
Rnd 9: sc around (18)
Rnd 10: sc around (18)
Rnd 11: (1 sc, dec) x 6 (12)
Rnd 12: dec around (6)
Rnd 13: fasten off, close hole (6)
Switch to brown yarn for the quiver.
quiver, brown yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: sc around (18)
Rnd 5: sc around (18)
Rnd 6: sc around (18)
Rnd 7: sc around (18)
Rnd 8: sc around (18)
Rnd 9: sc around (18)
Rnd 10: sc around (18)
Rnd 11: (1 sc, dec) x 6 (12)
Rnd 12: dec around (6)
Rnd 13: fasten off, close hole (6)
belt, brown yarn
Rnd 1: Ch 13, join with sl st to form ring, sc in each ch around (12)
Rnd 2: sc around (12)
Rnd 3: sc around (12)
Rnd 4: sc around (12)
Fasten off. Do not stuff.
strap, brown yarn
Rnd 1: Ch 12, join with sl st to form ring, sc in each ch around (11)
Rnd 2: sc around (11)
Fasten off. Do not stuff.
Final Stitch Counts
- head: 30 stitches at widest point
- body: 26 stitches at widest point
- flame hat: 23 stitches at widest point
- arm (x 2): 17 stitches at widest point
- leg (x 2): 18 stitches at widest point
- boot (x 2): 9 stitches at widest point
- eye (x 2): See pattern
- eyebrow (x 2): See pattern
- nose: See pattern
- bow: 7 stitches at widest point
- arrow: 18 stitches at widest point
- quiver: 18 stitches at widest point
- belt: 12 stitches at widest point
- strap: 11 stitches at widest point
Putting the Pieces Together
1. Stuff head, body, boot, arrow, quiver firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.
2. Sew body to the head. Align the pieces first and pin them in place, checking the overall shape against the reference photo, then whipstitch around the seam with matching yarn. Weave in the ends securely so the joint stays closed and firm.
3. Sew boot to the head. Align the pieces first and pin them in place, checking the overall shape against the reference photo, then whipstitch around the seam with matching yarn. Weave in the ends securely so the joint stays closed and firm.
4. Sew arrow to the head. Align the pieces first and pin them in place, checking the overall shape against the reference photo, then whipstitch around the seam with matching yarn. Weave in the ends securely so the joint stays closed and firm.
5. Sew quiver to the head. Align the pieces first and pin them in place, checking the overall shape against the reference photo, then whipstitch around the seam with matching yarn. Weave in the ends securely so the joint stays closed and firm.
6. Sew arm to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.
7. Sew leg to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.
8. Attach eye to the head. Position on the upper half of the head, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.
9. Embroider eyebrow above each eye, following the natural brow arch. Use short satin or back stitches in matching yarn, keeping the line light and slightly curved. Place them about one eye-width above the eyes for a balanced expression.
10. Embroider the nose with black thread centered between the eyes. Work a small triangular satin stitch about 8 mm wide.
11. Sew bow onto the head as shown in the reference photo, using the long tail for a discreet anchor. Pin first to try positions before committing.
12. Sew flame hat in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
13. Sew eyebrow in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
14. Sew belt in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
15. Sew strap in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
16. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.
Tips for a Perfect Finish and Care
These tips will help you crochet a clean, well-finished amigurumi doll:
- Stitch markers: Mark the first stitch of every round and you will never lose count again.
- Block flat pieces: Lightly steam any flat components before assembly, they will line up much better.
- Carry, don't cut: When changing colors within a piece, carry the unused yarn inside to minimize end-weaving.
- Embroider the details: Safety eyes aren't your only option. Embroidered features give a softer, handmade feel.
- Pin before sewing: Use sewing pins to position parts before attaching. Adjust until the shape looks right, then sew.
- Smaller hook = neater result: If stuffing peeks through, drop one hook size. Tight stitches look professional.
Caring for your archer amigurumi:
- Hand wash in cool water with mild detergent, no machine washing.
- Air dry flat, away from direct sunlight. Sun fades colors faster than you think.
- If safety eyes are used, ensure they are locked tight, not suitable for children under 3.
- Spot clean small stains with a damp cloth instead of washing the whole piece.
Frequently Asked Questions
Safety eyes or embroidered eyes?
Both work. Safety eyes look more polished but aren't safe for babies. Embroidered eyes are softer and baby-safe.
Can I sell finished items from this pattern?
Absolutely. Sell at craft fairs, online, wherever you like, just don't distribute the pattern itself.
What yarn works best?
Cotton gives the crispest stitches and most defined shape. Acrylic is softer and more affordable, both work great.
How long does this take?
Most crocheters finish in 2-4 hours. Your first one will be slower, and that's completely normal.
Can I resize it?
Yes, use a smaller hook and thinner yarn for a mini, or go up in hook size and yarn weight for a larger version. The proportions stay the same.
My stitches are too loose and stuffing shows, help?
Drop down one hook size. Tight, even stitches are the single most important thing for clean amigurumi.
More Free Patterns to Try
Love this pattern? Check out more free crochet patterns: