Zorg Alien Amigurumi For Sci Fi Plush Collectors
Finished Size: Approximately 10 inches (25 cm) tall and 7 inches (18 cm) wide
Skill Level: Intermediate
Estimated Time: 2-4 hours
Hook Size: 3.5 mm
Yarn: worsted yarn
Notions: Yarn needle, stitch marker, polyfill
Gauge: Approximately 12 sc x 14 rounds = 4 inches with 3.5 mm hook
The Best Things About This Pattern
There is something quietly satisfying about shaping a small UFO with a 3.5 mm hook and a skein of worsted yarn, watching the stitches tighten into a rounded saucer beneath your fingertips. This Zorg alien amigurumi stands roughly 10 inches (25 cm) tall and about 7 inches (18 cm) wide once finished, a size that feels substantial in the hand without tipping into shelf-display territory. The body is worked in continuous rounds with decreases to keep the curves smooth, while the dome of the craft uses shaping rows to build that gently slanted windshield where the little extraterrestrial pilot sits. A few rounds of the stitch detail add the banded ridges along the saucer’s edge, giving the finished piece a tactile, almost ribbed texture that begs to be traced with a thumb.
Because the skill level is Intermediate, you can expect to manage color work for the alien’s oversized eyes and the metallic-looking trim around the UFO, but nothing so layered that it demands technique or complex intarsia. The stitches are mostly single crochet with strategic half-double clusters to puff out the shoulders of the little pilot, and the shaping relies on measured decreases rather than dramatic increases. You will work a small a small practice piece in worsted weight before beginning, just to confirm that your tension produces a fabric dense enough to hide the stuffing, since the rounded silhouette of the saucer shows every gap. The pattern card lists exact stitch counts at each round, so you can track the shaping without guesswork, and the final assembly uses a whip stitch to seam the dome to the disc.
Finished, the piece works beautifully as a desk companion in a home office, a quirky shelf accent in a child’s reading nook, or a handmade gift for the friend who collects oddities. Many crocheters choose this project because the combination of a structured UFO base and a soft, expressive alien lets them practice shaping in two very different forms within
Quick Notes for Success
This UFO amigurumi is a rewarding make for anyone who loves quirky, retro sci-fi characters and wants a finished piece that doubles as shelf decor or a gift for a fellow enthusiast. The shape is for giving enough to suit crocheters who have a few amigurumi projects under their belt, yet the color work and shaping keep things interesting without crossing into overly complex territory. If you enjoy working in the round, counting stitches carefully, and adding personality through small details like embroidered windows and lights, this little Zorg will feel right at home in your project queue.
For a finished UFO measuring roughly 10 inches tall and 7 inches wide, choose a worsted weight acrylic or cotton blend in three contrasting colors: one for the saucer body, one for the dome, and one for the underside and trim. A solid or lightly heathered yarn works best because it lets the shaping read clearly, though a gentle variegated shade can mimic a metallic finish if you prefer a more otherworldly look. Keep your tension firm and even so the fiberfill does not show through the stitches, and consider a slightly darker shade for the underside to ground the silhouette. If you want a smaller finished UFO, simply drop to a sport weight yarn and tighten your gauge; if you want a larger display piece, hold two strands of worsted together while still using the same 3.5 mm hook.
One common pitfall with this design is loose stitching around the dome curve, which causes the fiberfill to bulge and distort the smooth saucer profile. To avoid this, switch to decreases stitches whenever you are shaping the dome, and pause every few rounds to reshape the piece in your hands before adding more stuffing. Tight, consistent tension combined with a 3.5 mm hook will give you a UFO that holds its flying-saucer shape wash after wash.
Yarn, Hooks, and Notions
| Material | Details |
|---|---|
| Yarn | worsted yarn in green, gray, black, purple, blue, silver, clear |
| Hook | 3.5 mm crochet hook |
| Stuffing | Polyfill or fiberfill |
| Eyes | Safety eyes or embroidery thread |
| Extras | Yarn needle, stitch markers, scissors |
Gauge: Approximately 12 sc x 14 rounds = 4 inches with 3.5 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.
Abbreviations You'll Need to Know
Note: This pattern uses US crochet terms. All rounds are worked in continuous rounds unless stated otherwise. Use a stitch marker in the first stitch of each round.
| Abbreviation | Meaning |
|---|---|
| sc | Single crochet |
| inc | Increase (2 sc in same stitch) |
| dec | Decrease (sc 2 together) |
| sl st | Slip stitch |
| ch | Chain |
How to Crochet This Pattern
head, green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: (3 sc, inc) x 6 (30)
Rnd 6: sc around (30)
Rnd 7: sc around (30)
Rnd 8: (3 sc, dec) x 6 (24)
Rnd 9: (2 sc, dec) x 6 (18)
Rnd 10: (1 sc, dec) x 6 (12)
Rnd 11: dec around (6)
Rnd 12: fasten off, close hole (6)
antenna, green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: sc around (18)
Rnd 5: sc around (18)
Rnd 6: sc around (18)
Rnd 7: sc around (18)
Rnd 8: sc around (18)
Rnd 9: sc around (18)
Rnd 10: sc around (18)
Rnd 11: (1 sc, dec) x 6 (12)
Rnd 12: dec around (6)
Rnd 13: fasten off, close hole (6)
ears (make 2), green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: (2 sc, inc) x 2 (8)
Rnd 3: sc around (8)
Rnd 4: sc around (8)
Rnd 5: sc around (8)
Rnd 6: (2 sc, dec) x 2 (6)
Rnd 7: fasten off, close hole (6)
Switch to black yarn for the eyes.
eyes (make 2), black yarn
Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.
If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.
If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.
mouth, black yarn
Embroider the mouth with black or dark brown thread after the eyes are placed.
Use a single curved satin stitch or back stitch, centered below the eyes and about 1.5 cm wide.
Switch to green yarn for the body.
body, green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: (11 sc, inc) x 2 (26)
Rnd 6: sc around (26)
Rnd 7: sc around (26)
Rnd 8: sc around (26)
Rnd 9: sc around (26)
Rnd 10: sc around (26)
Rnd 11: (11 sc, dec) x 2 (24)
Rnd 12: (2 sc, dec) x 6 (18)
Rnd 13: (1 sc, dec) x 6 (12)
Rnd 14: dec around (6)
Rnd 15: fasten off, close hole (6)
arms (make 2), green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 3 (2 sc, inc) x 2 (17)
Rnd 4: sc around (17)
Rnd 5: sc around (17)
Rnd 6: sc around (17)
Rnd 7: sc around (17)
Rnd 8: sc around (17)
Rnd 9: sc around (17)
Rnd 10: sc around (17)
Rnd 11: sc around (17)
Rnd 12: (dec) x 1 (1 sc, dec) x 5 (11)
Rnd 13: (dec) x 4 (1 sc, dec) x 1 (6)
Rnd 14: fasten off, close hole (6)
legs (make 2), green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: sc around (18)
Rnd 5: sc around (18)
Rnd 6: sc around (18)
Rnd 7: sc around (18)
Rnd 8: sc around (18)
Rnd 9: sc around (18)
Rnd 10: sc around (18)
Rnd 11: sc around (18)
Rnd 12: (1 sc, dec) x 6 (12)
Rnd 13: dec around (6)
Rnd 14: fasten off, close hole (6)
Switch to silver yarn for the name embroidery.
name embroidery, silver yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: (2 sc, dec) x 6 (18)
Rnd 7: (1 sc, dec) x 6 (12)
Rnd 8: dec around (6)
Rnd 9: fasten off, close hole (6)
Switch to clear yarn for the glass dome.
glass dome, clear yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: (2 sc, dec) x 6 (18)
Rnd 7: (1 sc, dec) x 6 (12)
Rnd 8: dec around (6)
Rnd 9: fasten off, close hole (6)
Switch to gray yarn for the UFO rim.
UFO rim, gray yarn
Rnd 1: Ch 15, join with sl st to form ring, sc in each ch around (14)
Rnd 2: sc around (14)
Fasten off. Do not stuff.
Switch to purple yarn for the decorative buttons.
decorative buttons (make 3), purple yarn
Rnd 1: 6 sc in magic ring (6)
Fasten off (6 sts)
Switch to gray yarn for the UFO base.
UFO base, gray yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: sc around (24)
Rnd 7: sc around (24)
Rnd 8: sc around (24)
Rnd 9: sc around (24)
Rnd 10: sc around (24)
Rnd 11: sc around (24)
Rnd 12: sc around (24)
Rnd 13: (2 sc, dec) x 6 (18)
Rnd 14: (1 sc, dec) x 6 (12)
Rnd 15: dec around (6)
Rnd 16: fasten off, close hole (6)
Switch to blue yarn for the UFO lights.
UFO lights (make 2), blue yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: (2 sc, dec) x 6 (18)
Rnd 7: (1 sc, dec) x 6 (12)
Rnd 8: dec around (6)
Rnd 9: fasten off, close hole (6)
Switch to gray yarn for the UFO landing gear.
UFO landing gear (make 3), gray yarn
Row 1: Ch 10, sc in 2nd ch from hook and across (9)
Row 2: Ch 1, turn, sc across (9)
Row 3: Ch 1, turn, sc across (9)
Row 4: Ch 1, turn, sc across (9)
Row 5: Ch 1, turn, sc across (9)
Row 6: Ch 1, turn, sc across (9)
Fasten off, leaving long tail for sewing
Final Stitch Counts
- head: 30 stitches at widest point
- antenna: 18 stitches at widest point
- ears (x 2): 8 stitches at widest point
- eyes (x 2): See pattern
- mouth: See pattern
- body: 26 stitches at widest point
- arms (x 2): 17 stitches at widest point
- legs (x 2): 18 stitches at widest point
- name embroidery: 24 stitches at widest point
- glass dome: 24 stitches at widest point
- UFO rim: 14 stitches at widest point
- decorative buttons (x 3): 6 stitches at widest point
- UFO base: 24 stitches at widest point
- UFO lights (x 2): 24 stitches at widest point
- UFO landing gear (x 3): 9 stitches at widest point
Bring It All Together
1. Stuff head, antenna, body, glass dome, UFO base, UFO landing gear firmly with polyfill. Shape the stuffing as you go, pressing and molding to create a natural form. Add extra stuffing to the center for a rounded shape, less near the edges for a tapered look.
2. Sew ears to the sides of the head. Position on the upper sides of the head, angled outward. Pin in place before sewing to check alignment from all angles. Use the long tail left for sewing and whipstitch around the base.
3. Attach eyes to the head. Position on the upper half of the head, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.
4. Sew mouth to the head. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.
5. Sew arms to the body. Position symmetrically on each side. For arms: attach at the upper third of the body, angled slightly outward. For legs: attach at the base, spaced evenly apart so the figure stands balanced. Pin in place, check from front and side views, then sew firmly with whipstitch.
6. Sew legs to the body. Position symmetrically on each side. For arms: attach at the upper third of the body, angled slightly outward. For legs: attach at the base, spaced evenly apart so the figure stands balanced. Pin in place, check from front and side views, then sew firmly with whipstitch.
7. Sew name embroidery in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
8. Sew UFO rim in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
9. Sew decorative buttons in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
10. Sew UFO lights in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
11. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.
Pro Tips and Care Advice
These tips and care notes will help you crochet and maintain your Zorg alien UFO amigurumi with consistent results. The pattern is written for a 3.5 mm hook and use familiarity with intermediate techniques such as decreases and the stitch detail.
- Use a stitch marker in the first stitch of every round and move it up at the start of each new round, because the dense single crochet stitches in amigurumi make it difficult to count rounds by sight alone.
- Maintain firm, even tension throughout the body and dome so the stuffing does not show through the stitches and the alien keeps its rounded UFO silhouette.
- Check your gauge by crocheting a small swatch in single crochet before starting the body, since a tighter gauge produces a sturdier toy that holds its shape during play.
- Use the decreases rather than a standard sc 2 tog when shaping the dome and the underside, because it keeps the decrease line smooth and prevents visible gaps where stuffing could peek out.
- Stuff the alien firmly with polyester fiberfill, adding small amounts gradually and shaping it with your fingers so the body reads as a well-defined saucer rather than a lumpy oval.
- Embroider the facial features and antenna details before closing the final seam, because working on a flat piece is easier than sewing into a stuffed three-dimensional form.
- When joining the dome to the UFO base, work the seam through both outer loops only to keep the join neat and to allow the two halves to sit flush.
- Use the stitch detail to add the glowing trim around the UFO rim, working in a contrasting color over finished single crochet so the line stays crisp and even.
Follow these care instructions to keep your finished amigurumi looking well over time.
- Hand wash gently in cool water with a mild detergent, then rinse
Quick Answers for Makers
What skill level is required for the Zorg alien in UFO amigurumi pattern?
The Zorg alien in UFO amigurumi pattern is rated Intermediate, so you should be comfortable with amigurumi basics like magic rings, single crochet stitches, and working in continuous spirals. You will also use techniques such as decreases and the stitch detail for the UFO details, which are standard at this level but not required for absolute beginners.
What hook size and yarn weight do I need for the Zorg alien in UFO amigurumi?
You will need a 3.5 mm crochet hook paired with worsted weight yarn to achieve the correct gauge for the Zorg alien in UFO amigurumi. This combination gives a tight stitch definition that prevents the stuffing from showing through, which is especially important for the small UFO dome and the alien's facial features.
How long does it take to crochet the Zorg alien in UFO amigurumi?
Most crocheters finish the Zorg alien in UFO amigurumi in 2-4 hours, depending on their pace and experience with intermediate techniques. The alien body and UFO base move quickly, while the the stitch detail details on the UFO may add extra time for those less familiar with the method.
Can I sell finished Zorg alien in UFO amigurumi toys?
Yes, you may sell finished Zorg alien in UFO amigurumi toys made from this pattern, provided you credit the designer and do not reproduce or resell the written pattern itself. Many crocheters sell these at craft fairs, online shops, and conventions, and the UFO theme tends to be a popular gift item for sci-fi fans.
Can I use a different yarn weight for the Zorg alien in UFO amigurumi?
You can substitute yarn weights, but you
Explore More Free Crochet Patterns
Love this pattern? Check out more free crochet patterns: