Manchester United Red Devil Amigurumi For Football Fan Gifts

Why Crocheters Love This Design

This for Manchester United Red Devil amigurumi is an amigurumi worked in red, black, gold, and yellow. You will crochet the head, horns, ears, eyes, nose, body, arms, legs, feet, tail, emblem patch, muzzle, mouth, left eyebrow, left hand, left foot, tail tip, hair tuft, logo, shorts, and the left wing. The pattern walks through each piece with clear round-by-round counts, then shows how to assemble and finish everything so the result matches the reference photos.

Use the pattern card as your material checklist before starting. Safety eyes give a polished look. It stands upright on its own. The instructions include embroidered details. Keep your tension even, count stitches at the end of shaping rounds, and check the placement notes before sewing pieces together for a clean handmade result.

Important Notes Before Beginning

This project captures the unmistakable spirit of Manchester United in a soft, huggable form, making it a wonderful gift for the devoted supporter in your life or a charming collectible for any football fan. The bold red devil design stands out on a shelf, in a nursery, or perched on a desk, and the satisfaction of seeing the finished figure come together stitch by stitch is genuinely rewarding. Because the pattern uses straightforward shaping with a few intermediate techniques sprinkled in, it suits crocheters who already feel comfortable working in the round and reading stitch counts, yet it remains approachable enough to be a fun weekend challenge.

For the body and devil horns, a worsted weight acrylic in a rich, saturated red will give the cleanest stitch definition and the most authentic team look. Pair it with a deep black for the shorts, boots, and facial features, and a small amount of white for the eyes and sock trim. If you prefer a softer drape, a cotton blend works nicely, though the finished piece may measure slightly smaller. Using a 3.5 mm hook throughout, the completed Red Devil stands approximately 10 inches (25 cm) tall and 7 inches (18 cm) wide, which makes it a satisfying size without requiring an enormous amount of yarn.

One common pitfall with this style of figure is loose tension at the color changes, which can leave small gaps where the red meets the black. To avoid this, keep your working yarn tension snug during the last pull-through of each color change and use the decreases when shaping the head and limbs so the surface stays smooth. Taking a moment to count stitches at the end of every round will also save you from having to frog several rows later.

Everything You Need to Make This

Material	Details
Yarn	worsted yarn in red, black, gold, yellow, pink, white
Hook	3.5 mm crochet hook
Stuffing	Polyfill or fiberfill
Eyes	Safety eyes or embroidery thread
Extras	Yarn needle, stitch markers, scissors

Gauge: Approximately 12 sc x 14 rounds = 4 inches with 3.5 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.

Crochet Stitches in This Pattern

Note: This pattern uses US crochet terms. All rounds are worked in crochet unless stated otherwise. Use a stitch marker in the first stitch of each round.

Abbreviation	Meaning
sc	Single crochet
inc	Increase (2 sc in same stitch)
dec	Decrease (sc 2 together)
ch	Chain

How to Crochet This Pattern

head, red yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (3 sc, inc) x 6 (30)

Rnd 6: sc around (30)

Rnd 7: sc around (30)

Rnd 8: (3 sc, dec) x 6 (24)

Rnd 9: (2 sc, dec) x 6 (18)

Rnd 10: (1 sc, dec) x 6 (12)

Rnd 11: dec around (6)

Switch to black yarn for the horns.

horns (make 2), black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: sc around (6)

Rnd 3: sc around (6)

Rnd 4: sc around (6)

Rnd 5: sc around (6)

Rnd 6: sc around (6)

Rnd 7: sc around (6)

Switch to red yarn for the ears.

ears (make 2), red yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (2 sc, inc) x 2 (8)

Rnd 3: sc around (8)

Rnd 4: sc around (8)

Rnd 5: sc around (8)

Rnd 6: (2 sc, dec) x 2 (6)

Switch to black yarn for the eyes.

eyes (make 2), black yarn

Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.

If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.

If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.

Switch to red yarn for the nose.

nose, red yarn

Embroider the nose with black thread after the eyes are placed.

Work a small triangular satin stitch centered between the eyes, about 8 mm wide.

Switch to red/black yarn for the body.

body, red/black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (11 sc, inc) x 2 (26)

Rnd 6: sc around (26)

Rnd 7: sc around (26)

Rnd 8: sc around (26)

Rnd 9: sc around (26)

Rnd 10: sc around (26)

Rnd 11: (11 sc, dec) x 2 (24)

Rnd 12: (2 sc, dec) x 6 (18)

Rnd 13: (1 sc, dec) x 6 (12)

Rnd 14: dec around (6)

arms (make 2), red/black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 3 (2 sc, inc) x 2 (17)

Rnd 4: sc around (17)

Rnd 5: sc around (17)

Rnd 6: sc around (17)

Rnd 7: sc around (17)

Rnd 8: sc around (17)

Rnd 9: sc around (17)

Rnd 10: sc around (17)

Rnd 11: sc around (17)

legs (make 2), red/black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: sc around (18)

Rnd 5: sc around (18)

Rnd 6: sc around (18)

Rnd 7: sc around (18)

Rnd 8: sc around (18)

Rnd 9: sc around (18)

Rnd 10: sc around (18)

Rnd 11: sc around (18)

Switch to black yarn for the feet.

feet (make 2), black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Switch to red/black yarn for the tail.

tail, red/black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: sc around (6)

Rnd 3: sc around (6)

Rnd 4: sc around (6)

Rnd 5: sc around (6)

Rnd 6: sc around (6)

Rnd 7: sc around (6)

Rnd 8: sc around (6)

Rnd 9: sc around (6)

Switch to gold/yellow yarn for the emblem patch.

emblem patch, gold/yellow yarn

Row 1: Ch 7, sc in 2nd ch from hook and across (6)

Row 2: Ch 1, turn, sc across (6)

Row 3: Ch 1, turn, sc across (6)

Row 4: Ch 1, turn, sc across (6)

Switch to pink yarn for the muzzle.

muzzle, pink yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (1 sc, inc) x 3 (9)

Rnd 3: sc around (9)

Rnd 4: (1 sc, dec) x 3 (6)

Rnd 5: fasten off, close hole (6)

Switch to black yarn for the mouth.

mouth, black yarn

Embroider the mouth with black or dark brown thread after the eyes are placed.

Use a single curved satin stitch or back stitch, centered below the eyes and about 1.5 cm wide.

left eyebrow, black yarn

Embroider this facial detail with black thread after the head is closed.

Use short straight stitches or satin stitch, keeping the line light and curved so it sits naturally above the eye.

left hand, black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

left foot, black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: dec around (6)

Rnd 4: fasten off, close hole (6)

tail tip, black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: sc around (6)

Rnd 3: sc around (6)

Rnd 4: sc around (6)

Rnd 5: sc around (6)

Rnd 6: sc around (6)

Rnd 7: sc around (6)

Rnd 8: sc around (6)

Rnd 9: sc around (6)

Rnd 10: fasten off, close hole (6)

Switch to red yarn for the hair tuft.

hair tuft, red yarn

Row 1: Ch 26, sc in 2nd ch from hook and across (25)

Row 2: Ch 1, turn, sc across (25)

Row 3: Ch 1, turn, sc across (25)

Row 4: Ch 1, turn, sc across (25)

Row 5: Ch 1, turn, sc across (25)

Row 6: Ch 1, turn, sc across (25)

Row 7: Ch 1, turn, sc across (25)

Switch to yellow yarn for the logo.

logo, yellow yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (2 sc, inc) x 2 (8)

Rnd 3: sc around (8)

Rnd 4: sc around (8)

Rnd 5: sc around (8)

Rnd 6: (2 sc, dec) x 2 (6)

Rnd 7: fasten off, close hole (6)

Switch to black yarn for the shorts.

shorts, black yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

left wing, black yarn

Row 1: Ch 18, sc in 2nd ch from hook and across (17)

Row 2: Ch 1, turn, sc across (17)

Row 3: Ch 1, turn, sc across (17)

Row 4: Ch 1, turn, sc across (17)

Row 5: Ch 1, turn, sc across (17)

Row 6: Ch 1, turn, sc across (17)

Row 7: Ch 1, turn, sc across (17)

Row 8: Ch 1, turn, sc across (17)

Row 9: Ch 1, turn, sc across (17)

Row 10: Ch 1, turn, sc across (17)

Row 11: Ch 1, turn, sc across (17)

Fasten off, leaving long tail for sewing

Final Assembly, Step by Step

1. Stuff head, body, left hand, left foot firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.

2. Sew horns to the top of the head. Position symmetrically, about 1 cm apart, angled slightly outward. Pin in place before sewing to check alignment from all angles. Use the long tail left for sewing and whipstitch around the base.

3. Sew ears to the sides of the head. Position just below the horns, angled outward at 45 degrees. Pin in place before sewing to check alignment from all angles. Use the long tail left for sewing and whipstitch around the base.

4. Attach eyes to the head. Position on the upper half of the head, below the horns, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.

5. Embroider the nose with black thread centered between the eyes. Work a small triangular satin stitch about 8 mm wide.

6. Sew muzzle to the front of the head. Center between the eyes, slightly below the eye line. Stuff lightly with polyfill before closing for a 3D effect. Pin in place before sewing to check alignment from all angles.

7. Sew mouth to the head. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

8. Embroider left eyebrow above each eye, following the natural brow arch. Use short satin or back stitches in matching yarn, keeping the line light and slightly curved. Place them about one eye-width above the eyes for a balanced expression.

9. Sew hair tuft to the head, covering the top and back of the head. Anchor along the hairline with whipstitch, blending the parting line into the scalp stitches. Keep stitches small so they hide in the yarn.

10. Sew arms to the body. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

11. Sew legs to the body. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

12. Sew tail to the body. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

13. Sew tail tip to the body. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

14. Slip shorts over the body; do not stuff it. Whipstitch the top edge to the shoulders or neckline, and leave the hem free so the garment drapes naturally. Pin evenly before sewing to keep the opening centered.

15. Sew left wing to the body. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

16. Sew feet in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

17. Sew emblem patch in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

18. Sew tail tip in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

19. Sew logo in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

20. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.

Tips for a Perfect Finish and Care

This amigurumi pattern is worked in continuous rounds with a 3.5 mm hook, which gives firm stitches that hold the Red Devil's shape well. The intermediate skill level use you are comfortable with magic ring, decreases, and the stitch detail for the emblem details. Read through every tip before starting so your tension, gauge, and finishing choices stay consistent from the first round to the final whip stitch.

• Place a stitch marker in the first stitch of every round and move it up at the start of each new round; this prevents the dreaded spiral seam and keeps your increases aligned with the pattern count.
• Maintain tight, even tension throughout because a 3.5 mm hook paired with the recommended yarn produces a dense fabric that keeps polyester fiberfill from showing through the stitches.
• Use the decreases (invdec) instead of a standard single crochet two together; it keeps the decrease line smooth and prevents the lumpy ridge that can appear on the Red Devil's rounded head and body.
• Stuff firmly but not rock-hard, adding small amounts of fiberfill at a time and shaping it with the back of your hook before closing each section; under-stuffing causes sagging, while over-stuffing distorts your stitch count and stretches the fabric.
• Work color changes for the red and black sections on the final yarn-over pull-through of the last stitch in the old color; this method hides the carry strand inside the piece and avoids the color-jog that interrupts a clean stripe.
• Embroider the devil emblem and any facial features using the stitch detail and duplicate stitch rather than sewing on felt, because the stitch detail lays flat against the body and resists peeling after repeated handling.
• Check your gauge by crocheting a 4-inch swatch in single crochet before beginning; if your swatch measures fewer stitches per inch, your amigurumi will grow larger than the

  Your Questions, Answered

  What skill level is required for the for Manchester United Red Devil amigurumi pattern?

  The for Manchester United Red Devil amigurumi is rated as an intermediate pattern, so familiarity with techniques like decreases, working in continuous spirals, and basic color changes is recommended. If you have completed a few standard amigurumi projects and feel comfortable reading stitch charts, you should manage the shaping and small parts well. Beginners can still attempt it, but expect a learning curve with the tighter gauge and detail work.

  How long does it take to crochet the for Manchester United Red Devil amigurumi?

  Most crocheters finish the for Manchester United Red Devil amigurumi in roughly 2-4 hours, depending on your stitching speed and how often you stop to sew pieces together. The head and body work up quickly in worsted yarn, while the horns, tail, and trident add extra time for assembly. Set aside an evening for the main pieces and a second short session for finishing.

  Can I sell finished items made from the for Manchester United Red Devil amigurumi pattern?

  Yes, you are generally welcome to sell finished for Manchester United Red Devil amigurumi toys made from this pattern, whether at craft fairs, online shops, or local markets. Please credit the designer when listing the item and do not resell, share, or reproduce the written pattern itself. Mass production for large commercial runs is usually restricted, so check the pattern notes for any specific limits.

  What yarn and hook should I use for the for Manchester United Red Devil amigurumi?

  The pattern is designed for worsted weight yarn paired with a 3.5 mm crochet hook, which gives the tight, defined stitches amigurumi needs. A 100% acrylic or cotton-acrylic blend in red, black, and a small amount of yellow or

  Explore More Free Crochet Patterns

  Love this pattern? Check out more free crochet patterns:

  • Gingerbread Man Amigurumi For Christmas Tree Ornaments
  • Totoro Amigurumi For Studio Ghibli Fans
  • Dalmatian Dog Amigurumi For Nursery Shelf Display
  • Football Player Amigurumi For Sports Fan Gifts
  • Black Bull Amigurumi For Taurus Zodiac Gifts