Gnorman Gnome Amigurumi Crochet Pattern

The Best Things About This Pattern

Meet Gnorman, a stout little gnome worked entirely in the round with worsted weight yarn and a 4 mm hook. At approximately 10 inches (25 cm) tall and 7 inches (18 cm) wide, he has a satisfyingly chunky silhouette that fills the palm of your hand, with a dense, slightly springy fabric from tight single crochet stitches. The pattern is rated Intermediate, so expect invisible decreases for seamless shaping, surface crochet to attach the beard and belt details, and a touch of short-row work to round out that classic pointed hat.

Construction begins at the base of the body and works upward through 42 rounds of even increases and decreases, building a firm, stuffing-friendly form before branching into the hat, nose, and two small mittened hands. The beard is crocheted separately in rows of tall stitches for a shaggy, textured finish, then surface-crocheted along the face so you can adjust the placement as you go. A small felt or crocheted band finishes the hat, and a wooden bead tucks neatly into the tip for a weighted, just-right drape.

Take your time with the gauge on the body rounds; a consistent tension keeps the stuffing from peeking through the stitches and helps Gnorman stand on his own. Once the pieces are joined, a few rounds of surface slip stitch around the belt area tie the whole figure together.

Gather These Supplies First

Material	Details
Yarn	worsted yarn in red, beige, black, green, white
Hook	4 mm crochet hook
Stuffing	Polyfill or fiberfill
Eyes	Safety eyes or embroidery thread
Extras	Yarn needle, stitch markers, scissors

Gauge: Approximately 12 sc x 14 rounds = 2 inches with 4 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.

Stitch Guide for This Pattern

Note: This pattern uses US crochet terms. All rounds are worked in continuous rounds unless stated otherwise. Use a stitch marker in the first stitch of each round.

Abbreviation	Meaning
sc	Single crochet
inc	Increase (2 sc in same stitch)
dec	Decrease (sc 2 together)
sl st	Slip stitch
ch	Chain

Let's Make It: Instructions

head, beige yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (3 sc, inc) x 6 (30)

Rnd 6: sc around (30)

Rnd 7: sc around (30)

Rnd 8: (3 sc, dec) x 6 (24)

Rnd 9: (2 sc, dec) x 6 (18)

Rnd 10: (1 sc, dec) x 6 (12)

Rnd 11: dec around (6)

Rnd 12: fasten off, close hole (6)

Switch to red yarn for the hat.

hat, red yarn

Rnd 1: Ch 24, join with sl st to form ring, sc in each ch around (23)

Rnd 2: sc around (23)

Rnd 3: sc around (23)

Rnd 4: sc around (23)

Rnd 5: sc around (23)

Rnd 6: sc around (23)

Rnd 7: sc around (23)

Rnd 8: sc around (23)

Rnd 9: sc around (23)

Fasten off. Do not stuff.

Switch to beige yarn for the beard.

beard, beige yarn

Row 1: Ch 10, sc in 2nd ch from hook and across (9)

Row 2: Ch 1, turn, sc across (9)

Row 3: Ch 1, turn, sc across (9)

Row 4: Ch 1, turn, sc across (9)

Row 5: Ch 1, turn, sc across (9)

Row 6: Ch 1, turn, sc across (9)

Fasten off, leaving long tail for sewing

Switch to black yarn for the eyes.

eyes (make 2), black yarn

Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.

If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.

If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.

Switch to beige yarn for the nose.

nose, beige yarn

Embroider the nose with black thread after the eyes are placed.

Work a small triangular satin stitch centered between the eyes, about 8 mm wide.

Switch to green yarn for the hands.

hands (make 2), green yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

Switch to white yarn for the hat pom-pom.

hat pom-pom, white yarn

Rnd 1: Ch 24, join with sl st to form ring, sc in each ch around (23)

Rnd 2: sc around (23)

Rnd 3: sc around (23)

Rnd 4: sc around (23)

Rnd 5: sc around (23)

Rnd 6: sc around (23)

Rnd 7: sc around (23)

Rnd 8: sc around (23)

Rnd 9: sc around (23)

Fasten off. Do not stuff.

Switch to beige yarn for the muzzle.

muzzle, beige yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (1 sc, inc) x 3 (9)

Rnd 3: sc around (9)

Rnd 4: (1 sc, dec) x 3 (6)

Rnd 5: fasten off, close hole (6)

Switch to green yarn for the sleeves.

sleeves (make 2), green yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (1 sc, inc) x 3 (9)

Rnd 3: sc around (9)

Rnd 4: sc around (9)

Rnd 5: sc around (9)

Rnd 6: sc around (9)

Rnd 7: sc around (9)

body, green yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (11 sc, inc) x 2 (26)

Rnd 6: sc around (26)

Rnd 7: sc around (26)

Rnd 8: sc around (26)

Rnd 9: sc around (26)

Rnd 10: sc around (26)

Rnd 11: sc around (26)

Rnd 12: sc around (26)

Rnd 13: sc around (26)

Rnd 14: sc around (26)

Rnd 15: (2 sc, dec) x 4 (3 sc, dec) x 2 (20)

Rnd 16: (1 sc, dec) x 4 (2 sc, dec) x 2 (14)

Rnd 17: (dec) x 4 (1 sc, dec) x 2 (8)

Rnd 18: (2 sc, dec) x 2 (6)

Rnd 19: fasten off, close hole (6)

arms (make 2), green yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 3 (2 sc, inc) x 2 (17)

Rnd 4: sc around (17)

Rnd 5: sc around (17)

Rnd 6: sc around (17)

Rnd 7: sc around (17)

Rnd 8: sc around (17)

Rnd 9: sc around (17)

Rnd 10: sc around (17)

Rnd 11: sc around (17)

How to Assemble the Finished Parts

1. Stuff head, hands, hat pom-pom, body firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.

2. Sew beard to the bottom of the head. Attach just below the muzzle, letting it hang down naturally. Use the long tail left for sewing and whipstitch along the top edge.

3. Attach eyes to the head. Position on the upper half of the head, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.

4. Embroider the nose with black thread centered between the eyes. Work a small triangular satin stitch about 8 mm wide.

5. Sew muzzle to the front of the head. Center between the eyes, slightly below the eye line. Stuff lightly with polyfill before closing for a 3D effect. Pin in place before sewing to check alignment from all angles.

6. Sew arms to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.

7. Sew sleeves in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

8. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.

Tips for a Perfect Finish and Care

These practical tips will help you crochet the Gnorman the Gnome amigurumi smoothly with a 4 mm hook.

• Place a stitch marker in the first stitch of every round and move it up each time to keep your stitch count accurate.
• Use the invisible decrease to keep your shaping smooth and avoid visible gaps between stitches.
• Stuff the head and body firmly before closing, adding small amounts of fiberfill as you work each round to maintain an even shape.
• Check your gauge in the early rounds so the finished piece matches the listed measurements.
• Use surface crochet to add the beard and hat details cleanly without sewing pieces on afterward.
• Keep tension consistent so the fabric stands up well and holds the stuffing without sagging.

Follow these care instructions to keep your finished gnome looking its best over time.

• Hand wash gently in cool water with mild detergent, then rinse thoroughly.
• Air dry flat on a clean towel, reshaping the piece while damp so it dries nicely.
• Spot clean small marks with a damp cloth instead of washing the whole doll.
• Keep the gnome out of direct sunlight to prevent colors from fading.

Good to Know: Reader Questions

What skill level is required for this pattern?

This pattern is rated Intermediate. It uses techniques such as invisible decrease, surface crochet, and working in continuous spiral rounds, which are standard for amigurumi at this level.

How long does it take to crochet Gnorman?

Most crocheters complete Gnorman in 2-4 hours, depending on stitch speed and experience with small amigurumi pieces.

What yarn and hook should I use?

The pattern calls for worsted weight yarn and a 4 mm crochet hook. Any comparable worsted weight yarn in the colors listed will work well.

Can I make the gnome larger or smaller?

Yes. To resize, switch to a thicker or thinner yarn and adjust your hook size to maintain a tight gauge. Larger yarn will create a bigger gnome, while sport or DK weight will produce a smaller one.

Can I sell finished Gnorman gnomes made from this pattern?

Yes, you may sell finished items made from this pattern. Please credit the designer when listing or sharing your work.

More Amigurumi Ideas You'll Love

Love this pattern? Check out more free crochet patterns:

• Panda Amigurumi Crochet Pattern For Doll Making
• Bear Ear Flap Hat Crochet Pattern For Cozy Winter Wear
• German Shepherd Dog Amigurumi Crochet Pattern
• Woody Amigurumi Doll Crochet Pattern
• Bear Amigurumi Crochet Pattern For Cozy Plush Making