Green White Yellow Puppet Crochet Pattern Guide
Finished Size: Approximately 10 inches (25 cm) tall and 7 inches (18 cm) wide
Skill Level: Intermediate
Estimated Time: 2-4 hours
Hook Size: 4 mm
Yarn: worsted yarn
Notions: Yarn needle, stitch marker, polyfill
Gauge: Approximately 12 sc x 14 rounds = 2 inches with 4 mm hook
What Makes This Pattern Special
Welcome to this intermediate amigurumi pattern, where we will work a charming green, white, and yellow puppet from the ground up using a 4 mm hook and worsted weight yarn. The finished figure stands approximately 10 inches (25 cm) tall and measures about 7 inches (18 cm) wide, giving you a sturdy, huggable companion once the stitches are joined and stuffed.
You will build the body in continuous rounds, shaping the head with invisible decreases and adding subtle dimension through short rows at the shoulders. Color changes between the green, white, and yellow sections are kept clean and manageable, with surface crochet details added after the main pieces are assembled. A quick gauge swatch in single crochet helps you confirm the tension before you begin, ensuring your stitches stay even and the finished doll holds its shape.
Take your time with each round, counting carefully as the stitch count climbs, and enjoy the rhythm of working the textured stitches that bring this little puppet to life.
Your Supply List
| Material | Details |
|---|---|
| Yarn | worsted yarn in green, white, black, yellow |
| Hook | 4 mm crochet hook |
| Stuffing | Polyfill or fiberfill |
| Eyes | Safety eyes or embroidery thread |
| Extras | Yarn needle, stitch markers, scissors |
Gauge: Approximately 12 sc x 14 rounds = 2 inches with 4 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.
Stitch Guide for This Pattern
Note: This pattern uses US crochet terms. All rounds are worked in continuous rounds unless stated otherwise. Use a stitch marker in the first stitch of each round.
| Abbreviation | Meaning |
|---|---|
| sc | Single crochet |
| inc | Increase (2 sc in same stitch) |
| dec | Decrease (sc 2 together) |
How to Crochet This Pattern
head, green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: (3 sc, inc) x 6 (30)
Rnd 6: sc around (30)
Rnd 7: sc around (30)
Rnd 8: (3 sc, dec) x 6 (24)
Rnd 9: (2 sc, dec) x 6 (18)
Rnd 10: (1 sc, dec) x 6 (12)
Rnd 11: dec around (6)
Rnd 12: fasten off, close hole (6)
ears (make 2), green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: (2 sc, inc) x 2 (8)
Rnd 3: sc around (8)
Rnd 4: sc around (8)
Rnd 5: sc around (8)
Rnd 6: (2 sc, dec) x 2 (6)
Switch to black yarn for the eyes.
eyes (make 2), black yarn
Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.
If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.
If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.
Switch to white yarn for the muzzle.
muzzle, white yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: (1 sc, inc) x 3 (9)
Rnd 3: sc around (9)
Rnd 4: (1 sc, dec) x 3 (6)
Rnd 5: fasten off, close hole (6)
Switch to yellow yarn for the nose.
nose, yellow yarn
Embroider the nose with black thread after the eyes are placed.
Work a small triangular satin stitch centered between the eyes, about 8 mm wide.
Switch to green yarn for the body.
body, green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: (11 sc, inc) x 2 (26)
Rnd 6: sc around (26)
Rnd 7: sc around (26)
Rnd 8: sc around (26)
Rnd 9: sc around (26)
Rnd 10: sc around (26)
Rnd 11: sc around (26)
Rnd 12: sc around (26)
Rnd 13: sc around (26)
Rnd 14: sc around (26)
Rnd 15: (2 sc, dec) x 4 (3 sc, dec) x 2 (20)
Rnd 16: (1 sc, dec) x 4 (2 sc, dec) x 2 (14)
Rnd 17: (dec) x 4 (1 sc, dec) x 2 (8)
Rnd 18: (2 sc, dec) x 2 (6)
Rnd 19: fasten off, close hole (6)
arms (make 2), green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 3 (2 sc, inc) x 2 (17)
Rnd 4: sc around (17)
Rnd 5: sc around (17)
Rnd 6: sc around (17)
Rnd 7: sc around (17)
Rnd 8: sc around (17)
Rnd 9: sc around (17)
Rnd 10: sc around (17)
Rnd 11: sc around (17)
Switch to yellow yarn for the hands.
hands (make 2), yellow yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: (2 sc, dec) x 6 (18)
Rnd 7: (1 sc, dec) x 6 (12)
Rnd 8: dec around (6)
Rnd 9: fasten off, close hole (6)
Switch to green yarn for the legs.
legs (make 2), green yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: sc around (18)
Rnd 5: sc around (18)
Rnd 6: sc around (18)
Rnd 7: sc around (18)
Rnd 8: sc around (18)
Rnd 9: sc around (18)
Rnd 10: sc around (18)
Rnd 11: sc around (18)
Switch to white yarn for the feet.
feet (make 2), white yarn
Rnd 1: 6 sc in magic ring (6)
Rnd 2: inc around (12)
Rnd 3: (1 sc, inc) x 6 (18)
Rnd 4: (2 sc, inc) x 6 (24)
Rnd 5: sc around (24)
Rnd 6: (2 sc, dec) x 6 (18)
Rnd 7: (1 sc, dec) x 6 (12)
Rnd 8: dec around (6)
Rnd 9: fasten off, close hole (6)
Final Stitch Counts
- head: 30 stitches at widest point
- ears (x 2): 8 stitches at widest point
- eyes (x 2): See pattern
- muzzle: 9 stitches at widest point
- nose: See pattern
- body: 26 stitches at widest point
- arms (x 2): 17 stitches at widest point
- hands (x 2): 24 stitches at widest point
- legs (x 2): 18 stitches at widest point
- feet (x 2): 24 stitches at widest point
Bring It All Together
1. Stuff head, body, hands firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.
2. Sew ears to the sides of the head. Position on the upper sides of the head, angled outward. Pin in place before sewing to check alignment from all angles. Use the long tail left for sewing and whipstitch around the base.
3. Attach eyes to the head. Position on the upper half of the head, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.
4. Sew muzzle to the front of the head. Center between the eyes, slightly below the eye line. Stuff lightly with polyfill before closing for a 3D effect. Pin in place before sewing to check alignment from all angles.
5. Embroider the nose with black thread centered between the eyes. Work a small triangular satin stitch about 8 mm wide.
6. Sew arms to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.
7. Sew legs to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.
8. Sew feet in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.
9. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.
Maker Tips and Keeping It Clean
These practical tips will help you crochet the green, white, and yellow amigurumi doll smoothly with a 4 mm hook.
- Place a stitch marker in the first stitch of every round so you can track increases and decreases accurately.
- Use the invisible decrease method to keep shaping neat, especially across the head and body color changes.
- Stuff the doll firmly but evenly before closing each section to maintain a well-defined silhouette.
- Check your gauge before starting; a slightly tighter tension helps the fiberfill stay in place and prevents gaps between stitches.
- Carry yarn tails along the inside when switching between green, white, and yellow to keep color transitions clean.
- Use surface crochet for adding facial details or stripes after the main pieces are assembled and stuffed.
Follow these care instructions to keep your finished doll looking its best over time.
- Hand wash gently in cool water with mild detergent, then rinse thoroughly.
- Air dry flat on a clean towel, reshaping the doll as needed while damp.
- Spot clean small marks with a soft cloth and gentle soap to avoid full washing.
- Keep the doll out of direct sunlight to prevent fading of the green, white, and yellow colors.
Quick Answers for Makers
Is this pattern suitable for beginners?
No, this pattern is rated Intermediate. It uses techniques like invisible decrease and surface crochet, which require some prior amigurumi experience. If you are new to crochet, consider practicing basic amigurumi projects first.
What yarn and hook should I use?
Use worsted weight yarn in green, white, and yellow, paired with a 4 mm crochet hook. This combination gives the right stitch definition for the doll's features and accessories.
How long will it take to finish this doll?
The time for this project is 2-4 hours, depending on your crochet speed and familiarity with intermediate techniques.
Can I sell finished dolls made from this pattern?
Yes, finished items made from this pattern is sold. Please credit the designer when listing your handmade dolls online or at craft fairs.
Can I resize the finished doll?
Yes, you can resize by switching to a finer or bulkier yarn, adjusting your hook size accordingly. Keep in mind that resizing will change the overall proportions and may affect stitch count.
Other Patterns You Might Enjoy
Love this pattern? Check out more free crochet patterns: