Baseball Player Amigurumi For Sports Fan Gifts

Finished baseball player amigurumi

Finished Size: Approximately 10 inches (25 cm) tall and 7 inches (18 cm) wide

Skill Level: Beginner

Estimated Time: 2-4 hours

Hook Size: 3.5 mm

Yarn: worsted yarn

Notions: Yarn needle, stitch marker, polyfill

Gauge: Approximately 12 sc x 14 rounds = 4 inches with 3.5 mm hook

What Makes This Pattern Special

Baseball player eye - black yarn detail

There is something quietly satisfying about finishing a round of single crochet, counting twenty-four stitches, and watching a baseball player take shape in your hands. This amigurumi pattern is worked in worsted weight yarn with a 3.5 mm hook, the kind of comfortable hook size that sits easily in your fingers for long sessions on the couch or at the kitchen table. The finished piece stands roughly 10 inches (25 cm) tall and 7 inches (18 cm) wide, a sturdy little figure that feels solid when you set it on a shelf or tuck it into a child’s arms.

The skill level on the pattern card is Beginner, so the stitch vocabulary stays friendly and approachable. You will work in continuous spirals, chain, slip stitch, single crochet, and simple increases and decreases, then sew the pieces together at the end. The texture is the classic tight, pebbled amigurumi fabric that holds its shape and gives the figure a clean, rounded look. Because the yarn is worsted weight, the stitches are large enough to count easily but small enough that the stuffing stays neatly hidden inside the body, the cap, and the little baseball mitt.

Picture this doll propped on a desk during the season opener, sitting beside the television for every playoff game, or riding home in a backpack after a long day at practice. It also makes a heartfelt gift for a coach, a Little League pitcher, or anyone who keeps a glove by the front door. A crocheter might choose this project because the finished size is generous enough to feel like a real companion rather than a keychain charm, and the simple shaping means you can complete the whole team in a weekend without losing patience or momentum.

Important Notes Before Beginning

This baseball player amigurumi is a fun make for anyone who loves the game or knows someone who does. It works up quickly, uses simple shaping, and turns out looking like a little figure ready to step up to the plate. Because the stitches are mostly single crochet worked in the round, even first-time amigurumi makers can finish it in a weekend. It also makes a great gift for coaches, fans, or kids who want a soft companion to toss around without breaking anything.

For yarn, a worsted weight acrylic in white, gray, and a team color of your choice will give you a classic baseball look. A small amount of black or brown works well for the cap details and bat. If you want a different feel, try a heathered gray for the uniform to mimic a road jersey, or go bold with bright red or navy for a home team vibe. Using a 3.5 mm hook with worsted weight yarn produces a tight, firm fabric that holds stuffing nicely and keeps the shape crisp. The finished figure stands about 10 inches (25 cm) tall and measures roughly 7 inches (18 cm) wide across the cap, so it fits comfortably on a shelf or desk.

One common slip-up is skipping the stitch count at the end of each round, which leads to lopsided shaping or a wobbly head. Counting out loud and placing a stitch marker at the start of every round keeps everything on track. Another easy mistake is stuffing too firmly before the final decreases, which can make the closing hole pucker. Add stuffing gradually and save a little room near the top so the closure sits flat and smooth.

Everything You Need to Make This

Baseball player mouth - black yarn detail
MaterialDetails
Yarnworsted yarn in tan, yellow, red, blue, white, black
Hook3.5 mm crochet hook
StuffingPolyfill or fiberfill
EyesSafety eyes or embroidery thread
ExtrasYarn needle, stitch markers, scissors

Gauge: Approximately 12 sc x 14 rounds = 4 inches with 3.5 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.

Abbreviations You'll Need to Know

Note: This pattern uses US crochet terms. All rounds are worked in continuous rounds unless stated otherwise. Use a stitch marker in the first stitch of each round.

AbbreviationMeaning
scSingle crochet
incIncrease (2 sc in same stitch)
decDecrease (sc 2 together)
sl stSlip stitch
chChain

How to Crochet This Pattern

Baseball player baseball - white yarn detail

head, tan yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (3 sc, inc) x 6 (30)

Rnd 6: sc around (30)

Rnd 7: sc around (30)

Rnd 8: (3 sc, dec) x 6 (24)

Rnd 9: (2 sc, dec) x 6 (18)

Rnd 10: (1 sc, dec) x 6 (12)

Rnd 11: dec around (6)

Rnd 12: fasten off, close hole (6)

Switch to black yarn for the eye.

eye (make 2), black yarn

Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.

If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.

If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.

mouth, black yarn

Embroider the mouth with black or dark brown thread after the eyes are placed.

Use a single curved satin stitch or back stitch, centered below the eyes and about 1.5 cm wide.

Switch to white yarn for the baseball.

baseball, white yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

Switch to red yarn for the baseball stitching.

baseball stitching, red yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

Switch to yellow yarn for the shirt.

shirt, yellow yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: sc around (18)

Rnd 5: sc around (18)

Rnd 6: sc around (18)

Rnd 7: sc around (18)

Rnd 8: sc around (18)

Rnd 9: sc around (18)

Rnd 10: sc around (18)

Rnd 11: (1 sc, dec) x 6 (12)

Rnd 12: dec around (6)

Rnd 13: fasten off, close hole (6)

Switch to red yarn for the shirt stripe.

shirt stripe, red yarn

Row 1: Ch 7, sc in 2nd ch from hook and across (6)

Row 2: Ch 1, turn, sc across (6)

Row 3: Ch 1, turn, sc across (6)

Row 4: Ch 1, turn, sc across (6)

Switch to blue yarn for the pants.

pants, blue yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: sc around (18)

Rnd 5: sc around (18)

Rnd 6: sc around (18)

Rnd 7: sc around (18)

Rnd 8: sc around (18)

Rnd 9: sc around (18)

Rnd 10: sc around (18)

Rnd 11: (1 sc, dec) x 6 (12)

Rnd 12: dec around (6)

Rnd 13: fasten off, close hole (6)

Switch to tan yarn for the arm.

arm (make 2), tan yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 3 (2 sc, inc) x 2 (17)

Rnd 4: sc around (17)

Rnd 5: sc around (17)

Rnd 6: sc around (17)

Rnd 7: sc around (17)

Rnd 8: sc around (17)

Rnd 9: sc around (17)

Rnd 10: sc around (17)

Rnd 11: sc around (17)

Switch to white yarn for the hand.

hand (make 2), white yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

Switch to tan yarn for the leg.

leg (make 2), tan yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: sc around (18)

Rnd 5: sc around (18)

Rnd 6: sc around (18)

Rnd 7: sc around (18)

Rnd 8: sc around (18)

Rnd 9: sc around (18)

Rnd 10: sc around (18)

Rnd 11: sc around (18)

foot (make 2), tan yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: dec around (6)

Rnd 4: fasten off, close hole (6)

Switch to red visceral_red yarn for the belt.

belt, red visceral_red yarn

Rnd 1: Ch 13, join with sl st to form ring, sc in each ch around (12)

Rnd 2: sc around (12)

Rnd 3: sc around (12)

Rnd 4: sc around (12)

Fasten off. Do not stuff.

Switch to tan yarn for the bat.

bat, tan yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: sc around (18)

Rnd 5: sc around (18)

Rnd 6: sc around (18)

Rnd 7: sc around (18)

Rnd 8: sc around (18)

Rnd 9: sc around (18)

Rnd 10: sc around (18)

Rnd 11: (1 sc, dec) x 6 (12)

Rnd 12: dec around (6)

Rnd 13: fasten off, close hole (6)

Switch to blue yarn for the handle wrap.

handle wrap, blue yarn

Rnd 1: Ch 12, join with sl st to form ring, sc in each ch around (11)

Rnd 2: sc around (11)

Rnd 3: sc around (11)

Rnd 4: sc around (11)

Fasten off. Do not stuff.

Switch to yellow yarn for the torso.

torso, yellow yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (11 sc, inc) x 2 (26)

Rnd 6: sc around (26)

Rnd 7: sc around (26)

Rnd 8: sc around (26)

Rnd 9: sc around (26)

Rnd 10: sc around (26)

Rnd 11: sc around (26)

Rnd 12: sc around (26)

Rnd 13: sc around (26)

Rnd 14: sc around (26)

Rnd 15: (2 sc, dec) x 4 (3 sc, dec) x 2 (20)

Rnd 16: (1 sc, dec) x 4 (2 sc, dec) x 2 (14)

Rnd 17: (dec) x 4 (1 sc, dec) x 2 (8)

Rnd 18: (2 sc, dec) x 2 (6)

Rnd 19: fasten off, close hole (6)

Switch to red yarn for the waist_band.

waist_band, red yarn

Row 1: Ch 7, sc in 2nd ch from hook and across (6)

Row 2: Ch 1, turn, sc across (6)

Row 3: Ch 1, turn, sc across (6)

Row 4: Ch 1, turn, sc across (6)

Fasten off, leaving long tail for sewing

baseball_stitching, red yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

Final Stitch Counts

  • head: 30 stitches at widest point
  • eye (x 2): See pattern
  • mouth: See pattern
  • baseball: 24 stitches at widest point
  • baseball stitching: 24 stitches at widest point
  • shirt: 18 stitches at widest point
  • shirt stripe: 6 stitches at widest point
  • pants: 18 stitches at widest point
  • arm (x 2): 17 stitches at widest point
  • hand (x 2): 24 stitches at widest point
  • leg (x 2): 18 stitches at widest point
  • foot (x 2): 12 stitches at widest point
  • belt: 12 stitches at widest point
  • bat: 18 stitches at widest point
  • handle wrap: 11 stitches at widest point
  • torso: 26 stitches at widest point
  • waist_band: 6 stitches at widest point
  • baseball_stitching: 24 stitches at widest point

Assembling Your Amigurumi

1. Stuff head, baseball, hand, foot, bat, torso firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.

2. Attach eye to the head. Position on the upper half of the head, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.

3. Sew mouth to the head. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

4. Slip shirt over the body; do not stuff it. Whipstitch the top edge to the shoulders or neckline, and leave the hem free so the garment drapes naturally. Pin evenly before sewing to keep the opening centered.

5. Slip shirt stripe over the body; do not stuff it. Whipstitch the top edge to the shoulders or neckline, and leave the hem free so the garment drapes naturally. Pin evenly before sewing to keep the opening centered.

6. Slip pants over the body; do not stuff it. Whipstitch the top edge to the shoulders or neckline, and leave the hem free so the garment drapes naturally. Pin evenly before sewing to keep the opening centered.

7. Sew arm to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.

8. Sew leg to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.

9. Sew baseball stitching in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

10. Sew shirt stripe in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

11. Sew belt in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

12. Sew handle wrap in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

13. Sew waist_band in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

14. Sew baseball_stitching in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

15. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.

Helpful Tips and Cleaning Advice

These practical crochet tips and care instructions are designed to help beginners create a well-finished baseball player amigurumi using a 3.5 mm hook. Each suggestion focuses on simple techniques that build confidence while producing a clean, durable doll.

  • Use stitch markers to mark your rounds. Because amigurumi is worked in continuous spirals, it is easy to lose track of where a round begins. Placing a small stitch marker in the first stitch of each round helps you count accurately and prevents uneven shaping in the head, body, and limbs.
  • Maintain even tension throughout your work. Consistent tension keeps your stitches uniform, which means the stuffing will not show through gaps. If your stitches feel tight, relax your hands slightly; if they feel loose, gently reduce the loop size on your hook.
  • Stuff the piece gradually as you crochet. Adding small amounts of fiberfill before the opening becomes too small prevents lumps and ensures the shape fills out smoothly. Use the end of your 3.5 mm hook to push stuffing into narrow areas like arms and legs.
  • Count your stitches carefully during decreases. Decreases shape the curves of the head and limbs, so missing a stitch can cause a visible dent or uneven curve. Counting after every decrease round helps you catch mistakes early.
  • Keep a steady, relaxed gauge. A medium-tight gauge with your 3.5 mm hook creates a fabric that holds stuffing well without being stiff. If your fabric looks too loose, try crocheting slightly tighter; if it puckers, loosen your tension.
  • Join pieces with a simple whip stitch. Thread a yarn needle with matching yarn and sew parts together using small, even stitches. This beginner-friendly method creates a secure attachment that holds up to gentle play.
  • We

    Quick Answers for Makers

    What yarn and hook should I use for the baseball player amigurumi?

    You will need worsted weight yarn in your chosen colors plus a 3.5 mm crochet hook. Worsted weight yarn works up quickly and gives the baseball player amigurumi a sturdy structure that holds its shape well. A 3.5 mm hook creates tight stitches that prevent stuffing from showing through.

    Is this baseball player amigurumi pattern suitable for beginners?

    Yes, this baseball player amigurumi pattern is rated as Beginner, so it uses only basic stitches like single crochet and simple increases and decreases. The pattern avoids advanced techniques, making it a great choice if you are just starting out. You will practice shaping small pieces and sewing them together.

    How long does it take to crochet the baseball player amigurumi?

    The time for this project is 2-4 hours, depending on your crochet speed and how often you pause. Most beginners finish in one relaxed afternoon, while more experienced crocheters can complete the baseball player amigurumi in a single sitting. Having all your yarn pre-sorted and stuffing ready helps speed things up.

    Can I sell finished baseball player amigurumi made from this pattern?

    Yes, you are generally welcome to sell finished baseball player amigurumi items made from this pattern, whether at craft fairs, online shops, or local markets. Just be sure to credit the pattern designer when you list or advertise your handmade pieces. Please do not reproduce or resell the written pattern itself.

    How do I customize the colors of the baseball player amigurumi?

    You can easily change the team colors by swapping the worsted weight yarn for your favorite shades, such as blue and white or red and black. The cap, jersey, and pants are worked

    More Amigurumi Ideas You'll Love

    Love this pattern? Check out more free crochet patterns:

Advertisement