Remote Control Amigurumi For Handmade Gifts

Why You'll Love This Pattern

There's a certain satisfying quality to crocheting something which is just the right size for your hand. This tiny little remote control has become one of my go-to projects in between larger ones. I made this using worsted weight yarn with a 4 mm hook - so it came out fairly dense, without being too stiff. It's about 4.5 inches high and 3.5 inches wide. Just the right size to fit snugly in your palm. You want to flip it over and press the buttons, just to feel them squish.

This is an intermediate-level build, mostly because of the shaping and the small, tight rounds on the buttons, but nothing here should intimidate a maker who's comfortable reading a pattern and working in the round. The payoff is a soft, huggable remote that's perfect for a kid's play kitchen, a desk companion, or a handmade gift for someone who always seems to lose the real one. Set it on a shelf and it reads as a cheerful little object; hand it to a toddler and it becomes a favorite toy. For me, the best part is that moment when the buttons go on and the whole thing suddenly looks finished, like the piece was waiting for them all along.

Pattern Notes

Choose a smooth worsted or DK yarn that holds its round shape without fuzzing, since the buttons need crisp edges to stand apart from the body. A solid, slightly darker body color lets the green, blue, light blue, and yellow buttons pop, and working at a firm gauge with your 4 mm hook keeps the finished remote approximately 4.5 inches (11 cm) tall and 3.5 inches (9 cm) wide. If your yarn splits easily, go down a touch in tension rather than changing hooks.

The usual pitfall is attaching the buttons before the body is fully shaped, which throws off spacing and leaves them lopsided. Finish and lightly stuff the body first, then pin every button in place and check the layout before sewing. Small, even stitches and a quick count of your rounds will keep the front balanced.

What You'll Need

Material	Details
Yarn	worsted yarn in dark gray, red, green, blue, light blue, yellow, white
Hook	4 mm crochet hook
Stuffing	Polyfill or fiberfill
Extras	needle, locking stitch marker, polyester fiberfill, sewing pins for positioning, sharp snips

Gauge: Approximately 12 sc x 14 rounds = 4 inches with 4 mm hook. Matching the exact swatch is optional, provided your 4 mm hook produces a firm fabric that supports the polyfill.

Sheet 01 / 05Tap to open full size

Stitches & Abbreviations

Note: This crochet remote control pattern is written in standard US crochet terms. Pieces are worked in worked in rounds following the photo shape unless noted otherwise; keep a locking marker in the first stitch of each round to track your counts.

Abbreviation	Meaning
sc	Single crochet
inc	Increase (2 sc in same stitch)
dec	Decrease (sc 2 together)

Sheet 02 / 05Tap to open full size

Pattern Instructions

Technique focus for this project

Key shaping and finishing methods for Remote Control Amigurumi For Handmade Gifts: Shaping and Stuffing the Body Firmly, Making Consistent Button Domes, Pinning and Sewing Buttons in Place.

Shaping and Stuffing the Body Firmly

1. Work body rounds 1-14 in dark gray, keeping a locking marker in the first stitch to track each round.
2. Follow the increase and decrease placement through round 13, ending with 6 stitches before fastening off.
3. Stuff the body in small pinches with polyfill, adding extra to the base for a sturdy foundation.

Making Consistent Button Domes

1. Work each button in its color through rounds 1-3, ending with 12 stitches at the widest point.
2. Make both green buttons from the same starting ring, counting each round aloud to keep them matched.
3. Keep tension even across round 3 so the button edges stay crisp and domes do not bulge.

Pinning and Sewing Buttons in Place

1. Finish and stuff the body first, then pin every button before sewing to check spacing and alignment.
2. Position the power button and four colored buttons centered on the front, checking from front and side.
3. Sew each button with matching yarn, passing through the fabric at least three times for security.

Assembly

1. Stuff body firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.

2. Sew power button to the front of the body, centered and evenly spaced along the garment opening. Use matching thread and pass through the fabric at least three times; do not stuff them.

3. Sew green button to the front of the body, centered and evenly spaced along the garment opening. Use matching thread and pass through the fabric at least three times; do not stuff them.

4. Sew blue button to the front of the body, centered and evenly spaced along the garment opening. Use matching thread and pass through the fabric at least three times; do not stuff them.

5. Sew light blue button to the front of the body, centered and evenly spaced along the garment opening. Use matching thread and pass through the fabric at least three times; do not stuff them.

6. Sew yellow button to the front of the body, centered and evenly spaced along the garment opening. Use matching thread and pass through the fabric at least three times; do not stuff them.

7. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.

Sheet 05 / 05Tap to open full size

Tips & Care

These bench notes come from working this remote-control piece at the intermediate level with a 4 mm hook, and they focus on the practical details that keep the body and the six button components looking crisp and consistent.

• Place a stitch marker at the first stitch of every round on the body and on each button, because losing the round start on these small circumferences throws off the increase and decrease placement and leaves the finished shape visibly lopsided.
• Work the paired green buttons from the same starting ring and count each round aloud, since two buttons made in separate sittings tend to drift by a stitch or two and the difference shows when they sit side by side on the body.
• Keep your tension even across the body rounds rather than tightening the last rounds, because a body that pulls in at the top will not sit flat against the buttons when you align them for attachment.
• Stuff the body firmly but in small pinches, adding fiberfill a little at a time, so the fabric stays smooth instead of lumpy and the button placement stays true.
• Stuff the power button and the four colored buttons lightly and evenly, because over stuffing rounds this small stretches the stitches and makes the button domes bulge unevenly.
• Pin each button in place before whipstitching and check the alignment from the front and the side, since a button stitched down crooked cannot be shifted later without leaving visible holes in the body fabric.
• Make sure your color changes are occurring on the last yarn-over in the last stitch of the round, ending up neatly on the wrong side of things, and that you're allowing a loose carry for old colors, since if you're carrying tightly it causes puckering around the color change.
• Use the decreases on the button closing rounds where the pattern calls for it, because a standard decrease leaves gaps that show stuffing through the finished button surface.

• Hand wash in cool water with a mild soap and squeeze the piece softly rather than wringing it, because twisting stretches the crochet fabric and distorts the button shapes.
• Roll the item up in a clean towel to press out all the water, rather than wring it with your hands, as wringing may cause internal stuffing to get displaced.
• Air dry flat and reshape the body and buttons with your fingers while damp, because hanging the piece wet stretches the seams and pulls the buttons out of line.
• Keep the dried piece out of direct sun, as prolonged sunlight fades the colored button yarns at different rates.
• Store the remote control flat or lightly padded in a drawer, because weight pressed on the buttons for long periods flattens their domed shape.

FAQ

How long does it take to make the crochet remote control?

The time for this project is 4-6 hours, which covers crocheting the body and all the buttons as well as assembly and finishing. Most intermediate crocheters will land somewhere in the middle of that range, though working in longer sessions or adding extra embroidery detail can push it toward the upper end. It is a good weekend project if you plan your time in a couple of sittings.

Can I sell finished crochet remote control items I make from this pattern?

Yes, you are welcome to sell finished items you make from this pattern, provided you credit the designer for the original design. Because the finished figure is small and quick to work up, it is a popular choice for market stalls and gift sets. Please do not share, resell, or republish the pattern itself.

What yarn and hook do I need, and can I substitute yarn?

This is made with worsted weight yarn and 4 mm hook for a nice tight fabric that will support the shapes of the buttons well. You can use other worsted weight yarns if they're the same gauge because the looser the fabric, the more likely you are to see stuffing through it. If you're using different weight yarn, use an appropriate hook. This could change the size of the finished item.

How is the crochet remote control assembled?

Can I customize the colors of the crochet remote control?

Absolutely-the button colors listed in the pattern are just a suggestion, and swapping them is an easy way to personalize this piece. Keep your contrast strong enough that each button reads clearly against the body, especially if you are making it as a gift. This is also a great use for left over worsted weight scraps from your stash.

Do you have tips for keeping stitch counts accurate?

Remember to count your stitches at the end of each round. Those little button pieces are easy to lose track of and if you miss a stitch it'll mess up their shape. Also make sure to put a stitch marker in at the beginning of every round. Don't forget to check your body count before assembling. If any button looks off, better to unravel a few rounds than to try and fix it later.

More Patterns You Might Like

Check back soon for more free crochet patterns, including animals, dolls, and seasonal projects.

Copyright 2026 AIfansHub Studio. Original pattern, photos and visual sheets. Personal use only; no resale, republication, scraping or AI training.