Tooth And Toothbrush Amigurumi For Kids Dental Education

Why This Pattern Is Worth Your Time

Meet your new bathroom buddy: a friendly little tooth and toothbrush set, worked up in soft worsted yarn with a 3.5 mm hook. At roughly 10 inches tall and 7 inches wide, this duo is just the right size to perch on a shelf, tuck into a gift basket, or hand to a child who is learning that brushing is something to smile about. The stitches are simple, the rounds are short, and the shaping comes together quickly, making it a satisfying weekend project.

You will work in continuous spirals using basic single crochet, gentle increases, and even decreases to round out the tooth's plump shape and the toothbrush's slim handle. A few rounds of contrasting yarn add the bristle band, and small details like embroidered cheeks or a tiny smile bring the characters to life. With a Beginner skill level, the pattern uses straightforward stitches, clear stitch counts, and friendly step-by-step guidance, so crocheters who know how to hold a hook and make a chain can dive right in. Grab your yarn, settle into a comfy chair, and prepare to stitch up a pair of pals that are equal parts practical and playful.

Gather These Supplies First

Material	Details
Yarn	worsted yarn in white, turquoise, black, pink
Hook	3.5 mm crochet hook
Stuffing	Polyfill or fiberfill
Eyes	Safety eyes or embroidery thread
Extras	Yarn needle, stitch markers, scissors

Gauge: Approximately 12 sc x 14 rounds = 2 inches with 3.5 mm hook. Not critical but aim for tight, even stitches, if stuffing shows through, go down one hook size.

Crochet Stitches in This Pattern

Note: This pattern uses US crochet terms. All rounds are worked in continuous rounds unless stated otherwise. Use a stitch marker in the first stitch of each round.

Abbreviation	Meaning
sc	Single crochet
inc	Increase (2 sc in same stitch)
dec	Decrease (sc 2 together)

The Full Pattern, Step by Step

tooth body, white yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (11 sc, inc) x 2 (26)

Rnd 6: sc around (26)

Rnd 7: sc around (26)

Rnd 8: sc around (26)

Rnd 9: sc around (26)

Rnd 10: sc around (26)

Rnd 11: (11 sc, dec) x 2 (24)

Rnd 12: (2 sc, dec) x 6 (18)

Rnd 13: (1 sc, dec) x 6 (12)

Rnd 14: dec around (6)

Rnd 15: fasten off, close hole (6)

arm (make 2), white yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 3 (2 sc, inc) x 2 (17)

Rnd 4: sc around (17)

Rnd 5: sc around (17)

Rnd 6: sc around (17)

Rnd 7: sc around (17)

Rnd 8: sc around (17)

Rnd 9: sc around (17)

Rnd 10: sc around (17)

Rnd 11: sc around (17)

leg (make 2), white yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: sc around (18)

Rnd 5: sc around (18)

Rnd 6: sc around (18)

Rnd 7: sc around (18)

Rnd 8: sc around (18)

Rnd 9: sc around (18)

Rnd 10: sc around (18)

Rnd 11: sc around (18)

Switch to black yarn for the eye.

eye (make 2), black yarn

Use 6 mm safety eyes or embroidered eyes; place them on the upper half of the head, about one eye-width apart.

If using safety eyes, insert the posts before closing the head opening and secure the backs firmly on the inside.

If embroidering, work two small black satin stitches, then add a tiny white stitch highlight if desired.

eyebrow (make 2), black yarn

Embroider this facial detail with black thread after the head is closed.

Use short straight stitches or satin stitch, keeping the line light and curved so it sits naturally above the eye.

mouth, black yarn

Embroider the mouth with black or dark brown thread after the eyes are placed.

Use a single curved satin stitch or back stitch, centered below the eyes and about 1.5 cm wide.

Switch to pink yarn for the cheek.

cheek (make 2), pink yarn

Add the cheek detail with pale pink embroidery thread after the head is closed.

Work two or three tiny straight stitches on each side, just below and outside the eye line.

Switch to turquoise yarn for the toothbrush handle.

toothbrush handle, turquoise yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: (inc) x 4 (1 sc, inc) x 1 (11)

Rnd 3: sc around (11)

Rnd 4: sc around (11)

Rnd 5: (dec) x 4 (1 sc, dec) x 1 (6)

Rnd 6: fasten off, close hole (6)

Switch to white yarn for the toothbrush bristles.

toothbrush bristles, white yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

head, white yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: (3 sc, inc) x 6 (30)

Rnd 6: sc around (30)

Rnd 7: sc around (30)

Rnd 8: (3 sc, dec) x 6 (24)

Rnd 9: (2 sc, dec) x 6 (18)

Rnd 10: (1 sc, dec) x 6 (12)

Rnd 11: dec around (6)

Rnd 12: fasten off, close hole (6)

Switch to turquoise yarn for the clothing.

clothing, turquoise yarn

Rnd 1: 6 sc in magic ring (6)

Rnd 2: inc around (12)

Rnd 3: (1 sc, inc) x 6 (18)

Rnd 4: (2 sc, inc) x 6 (24)

Rnd 5: sc around (24)

Rnd 6: (2 sc, dec) x 6 (18)

Rnd 7: (1 sc, dec) x 6 (12)

Rnd 8: dec around (6)

Rnd 9: fasten off, close hole (6)

Final Assembly, Step by Step

1. Stuff tooth body, toothbrush handle, head firmly with polyfill for stability. Shape as you go, pressing and molding to match the reference photo. Add extra stuffing to the base for a sturdy foundation.

2. Sew arm to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.

3. Sew leg to the body. Align carefully and pin in place before sewing. Check from all angles, then sew firmly with whipstitch.

4. Slip clothing over the body; do not stuff it. Whipstitch the top edge to the shoulders or neckline, and leave the hem free so the garment drapes naturally. Pin evenly before sewing to keep the opening centered.

5. Attach eye to the head. Position on the upper half of the head, spaced about one eye-width apart. Secure firmly with embroidery thread or fabric glue. Embroider a small line below each eye for a more expressive look.

6. Embroider eyebrow above each eye, following the natural brow arch. Use short satin or back stitches in matching yarn, keeping the line light and slightly curved. Place them about one eye-width above the eyes for a balanced expression.

7. Sew mouth to the head. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

8. Sew cheek to the head. Pin in place before sewing to check positioning. Use whipstitch for a secure attachment.

9. Sew eyebrow in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

10. Sew toothbrush bristles in place following the reference photo. Pin first to check positioning, then whipstitch with matching yarn, weaving in the ends securely.

11. Check all seams are secure. Gently tug each attached piece to test. Trim any loose yarn ends with sharp scissors. Weave in all remaining tails with a needle, passing through at least 3 stitches in each direction to prevent unraveling. Give the finished piece a gentle squeeze to distribute stuffing evenly and shape the final form.

Tips for a Perfect Finish and Care

These helpful tips will guide you through crocheting your tooth and toothbrush amigurumi with a 3.5 mm hook, keeping things simple for a beginner project.

• Place a stitch marker in the first stitch of every round so you can easily find your starting point and keep your stitch count accurate.
• Check your gauge by crocheting a small swatch before starting; a tight gauge prevents the stuffing from showing through the stitches.
• Stuff the tooth firmly but not too tightly, adding small amounts of fiberfill piece by piece so the shape stays smooth and even.
• Use simple decreases by working two single crochets together, which keeps the shaping neat without requiring advanced techniques.
• Keep your tension consistent throughout so the fabric looks well and the finished doll holds its shape nicely.
• Count your stitches at the end of each round to catch mistakes early and maintain the correct size.

Follow these care instructions to keep your amigurumi looking its best over time.

• Hand wash gently in cool water with a mild detergent to protect the fibers.
• Air dry flat on a clean towel, reshaping the piece as needed while damp.
• Avoid direct sunlight during drying to prevent color fading.
• Spot clean small marks with a damp cloth instead of washing the whole piece.

Quick Answers for Makers

What yarn and hook do I need for the tooth and toothbrush amigurumi?

You will need worsted weight yarn in white, pink, and a small amount of black and blue. A 3.5 mm crochet hook works nicely with this yarn weight to create tight, even stitches.

Is the tooth and toothbrush amigurumi pattern beginner-friendly?

Yes, this pattern is rated Beginner. It uses basic stitches like single crochet, simple increases, and decreases, with no advanced techniques required.

How long does it take to crochet the tooth and toothbrush amigurumi?

The time for this project is 2-4 hours, depending on your crochet speed and experience level.

Can I sell finished tooth and toothbrush amigurumi made from this pattern?

Yes, you may sell finished items made from this pattern. Please credit the designer when listing your products online or at craft fairs.

Can I resize the tooth and toothbrush amigurumi?

You can adjust the size by using a thicker or thinner yarn with a matching hook size. Keep in mind this will change the overall appearance and may require adjusting stitch counts.

Explore More Free Crochet Patterns

Love this pattern? Check out more free crochet patterns:

• Panda Amigurumi For Handmade Gifts And Nursery Decor
• Bear Ear Flap Hat Crochet Pattern For Cozy Winter Wear
• German Shepherd Dog Amigurumi Crochet Pattern
• Woody Amigurumi Doll Crochet Pattern
• Bear Amigurumi Crochet Pattern For Cozy Plush Making