Charcoal Ember Imp Amigurumi Pattern With Two Tone Body

Why You'll Enjoy Making This Pattern
This Charcoal Ember Imp began as a way to use the last of a charcoal worsted skein, and it turned into the project I kept reaching for between larger ones. On a 4.0 mm hook the fabric comes out dense and firm, with a dry hand and stitches that sit close together, so the finished piece holds its shape and the stuffing stays where it belongs. It measures about 7 in (18 cm) tall and 3 in (8 cm) wide, small enough to cup in one palm, with enough weight that it sits solidly on a shelf.
The silhouette carries most of the character. Head, body, two arms, two legs, two ears, two horns, and a tail all come off the hook in rounds, then get sewn together during assembly. The head and the body are separate pieces, joined at that stage once both are stuffed, which means the neck lands exactly where you place it. I like setting the head at a slight tilt before the last pass of the needle; that small angle makes the imp look like it is following something across the room.
My favorite moment on the hook is the horns. They are short, quick rounds, and turning the second one right side out, watching that small point hold its shape with no help from me, is the bit that makes the whole thing feel finished before assembly even starts. The ears run a close second, since they are the first hint of a face taking shape.
The eyes and the ember belly are finishing work, embroidered rather than crocheted as separate pieces, and they are what pull the face together at the end. Once the last thread is tucked in, this little imp earns a spot on a desk corner or a mantel, or goes into a gift bag for someone who likes their handmade things with a bit of shadow to them.
Pattern Notes
Pattern at a glance: 11 pieces to crochet. Components and details - head, body, arm, leg, ear, horn, tail, eye and ember belly - worked in 48 rounds and rows to about 7 in (18 cm) tall in Worsted weight with a 4.0 mm hook.
I build the head, body, arms, legs, ears, horns, and tail in continuous rounds with a 4.0 mm hook. The head and body are separate pieces, not one continuous tube, and I join them during assembly. The eyes and ember belly are finishing details rather than separate crocheted pieces. Treat each round piece as its own unit and keep a stitch marker at the first stitch so the shaping stays easy to follow.
Charcoal covers the head, body, arms and legs, ears, horns, and tail, with black for the eyes and coral for the ember belly. That split lets the darker shapes carry the imp's silhouette while the coral gives the belly a warm center. Work the charcoal at an even tension so the stuffed pieces stay smooth and hold their shape, and keep the black and coral details tight and flat. Finished, the imp measures about seven inches (18 centimeters) tall and 3 in (8 cm) wide. If you swap in other yarn colors, keep the eyes and ember belly distinct so the face and belly still read clearly; a faint cheek blush or simple embroidery is enough finishing.
The main pitfall is the head-to-body join. After both pieces are stuffed, pin the head in place so it sits centered over the neck opening, then sew the head to the body. Check the front and side profile before you stitch; an uneven join or too much stuffing at the neck will make the imp tilt and pull the body out of shape. Use a small amount of stuffing near the neck, sew through both layers, and add any last stuffing before you close the seam. I pin and check from two angles, then stitch.
What You'll Need
Finished Size: Approximately 7 in (18 cm) tall and 3 in (8 cm) wide
Skill Level: Beginner
Estimated Time: 5-8 hours
Hook Size: 4.0 mm
Yarn: Worsted yarn
| Material | Details |
|---|---|
| Yarn | Worsted: charcoal 47 m (52 yd), black 2 m (3 yd), coral 2 m (3 yd). Total about 51 m (56 yd). |
| Hook | 4.0 mm crochet hook |
| Stuffing | Polyfill or fiberfill |
| Eyes | Safety eyes or embroidery thread |
| Extras | Tapestry needle, locking stitch marker, sewing pins for positioning, sharp snips |
Gauge: Approximately 12 sc x 14 rounds = 4 inches with 4.0 mm hook. If gaps appear between stitches when stuffing the Charcoal Ember Imp, switch to a slightly smaller hook for a cleaner finish.

Stitches & Abbreviations
Note: All stitches for this Charcoal Ember Imp follow US crochet terminology. Crochet the main pieces in continuous rounds unless a section calls for turned rows, and advance your stitch marker at the beginning of each round.
| Abbreviation | Meaning |
|---|---|
| sc | Single crochet |
| inc | Increase (2 sc in same stitch) |
| dec | Decrease (sc 2 together) |

Pattern Instructions
Rather than scrolling past dense walls of numbers, follow the 5 illustrated pattern images shown on this page for the head, body, and arm of the charcoal ember imp. Click a picture at any step to enlarge the written chart.


Technique Focus For This Project
Practical bench notes covering Shaping the Separate Head and Body, Joining Stuffed Head to Stuffed Body, Attaching Paired Arms, Legs, Ears, Horns, Tail.
Shaping the Separate Head and Body
- Build the head from its 6-stitch ring up to 26 stitches by rnd 5, then keep rnds 6-8 flat.
- Shape the body separately from 6 stitches to 22 by rnd 4, holding rnds 5-7 even before decreasing.
- Keep charcoal tension comparable on both pieces, because a looser head or body can pucker at the neck seam.
Joining Stuffed Head to Stuffed Body
- Stuff the 26-stitch head and 22-stitch body firmly, using light tufts and less fill close to the neck opening.
- Mark center front and center back on both pieces with pins, then align those marks before the first whipstitch.
- Pin the head centered over the body's neck opening, checking front and side profiles before stitching through both layers.
Attaching Paired Arms, Legs, Ears, Horns, Tail
- Sew the 8-stitch arms just below the neck join, angling them slightly outward and pinning both sides before whipstitching.
- Place the 10-stitch legs at the body base with even spacing, pinning front and side views so the imp balances.
- Attach the 6-stitch tail centered at the lower back, pinning its angle first, then work whipstitch at the tail root.
Assembly
1. When using safety eyes, insert them through the head and lock both washers on the inside before closing the opening. Embroidered eyes can be added later.
2. Stuff charcoal head, charcoal body firmly with polyfill. Use your fingers to mold the stuffing while the opening is still open. Stuff the center to carry the volume, and use only enough stuffing at the edges to hold their line.
3. Lightly stuff the charcoal arms and charcoal legs with polyfill, keeping the fill soft rather than tight so the joints bend naturally. Compare the two sides first, then sew.
4. Sew head to the body. Pin opposite sides of the seam to check left-to-right and front-to-back alignment, then whipstitch smoothly. Tighten each stitch enough to hide the seam line, and bury the tail deep in the fill.
5. Sew each arm to the upper sides of the body just below the neck join, angling both slightly outward. Pin both sides symmetrically, check them from the front, then sew firmly with a whipstitch.
6. Sew the legs to the base of the body, spacing them to anchor the underside evenly; pin the figure and check that it sits flat before sewing neat, tight stitches around the upper rim.
7. Attach the tail to the lower back of the body, aligned at mid-back near the lower rounds so it steadies the figure's balance; pin the curve angle first to test it, then close around the root.
8. Attach ember belly by embroidering directly onto the body with coral yarn or embroidery floss, marking balanced placement with pins first. Form neat satin or straight stitches and weave the tails inside.
9. Sew ears to the sides of the head. Set each ear directly under the horn curve so it flares slightly outward from the head contour. Pin the bases temporarily, check from straight ahead that their height is level, then whipstitch the bases closed with the tail.
10. Sew horns to the top of the head. Center them bilaterally with nearly 1 cm gap and an outward slant, pinning until both sides mirror each other cleanly before stitching round the base.
11. Attach eyes to the head. Place them on the upper hemisphere under the horns, about one eye-width apart, so the facial expression looks balanced. Sew it down with embroidery thread, and reserve the glue for emergencies. Stitch a small mark below each eye, keeping it short and level.
12. Using black or dark brown thread, embroider a small curved line below the eyes to form the mouth.
13. Check all seams are secure. Test each attachment with a light tug before moving on. Cut the stray tails with the tips of sharp scissors. Weave each remaining tail through three stitches in one direction and three in the opposite direction so nothing works loose. Squeeze slowly from top to bottom to settle the fill and set the shape.

Tips & Care
Stuff the imp with polyfill in small pinches rather than one solid wad, pressing gently toward the walls so the round contours dry and cure smooth without lumps.
The Charcoal Ember Imp is built from separate round-worked pieces, so even tension with the 4.0 mm hook and patient assembly matter as much as the crochet itself.
- Put a stitch marker in the first stitch of every round and shift it up as you progress. On the small horns, ears, and tail, this keeps you from losing track of where each round begins.
- Work the head and body with the same hand tension and the same 4.0 mm hook. If one comes out noticeably looser than the other, the seam will pucker when you sew them together after stuffing both pieces.
- Stuff the head and body in thin, loose layers of polyfill rather than one large handful. Large clumps create hard spots and can push the round shape out of line, so aim for firm but still softly squeezable.
- Before whipstitching the arms, legs, ears, horns, and tail, pin each piece in place and check the pairs from the front, back, and both sides. Pinning first keeps the pieces from sliding during sewing and makes mismatched placements obvious before they become permanent.
- Leave a long yarn tail on each small part, thread it on a blunt needle, and run the end down inside the matching piece before trimming. This hides the joining tail and reduces the chance of a loose end working out through a seam later.
- When you sew the head to the body, mark the center front and center back with pins before taking the first stitch. Aligning those marks after both parts are stuffed keeps the neck seam straight instead of letting the head settle at an angle.
- If you use a contrasting thread for the eye finishing, pin the position of both eyes first and work equal-length stitches on each side. Bury each thread end inside the piece so the face stays balanced and no loose tail shows on the surface.
- After crocheting the ears, horns, and tail, pin them flat on a foam mat and hover a steamer a few inches away. Gentle steam helps the edges lie flat and hold their curve, while a hot iron pressed directly on the yarn can flatten the stitches or damage the fibers.
Keep the finished imp clean with gentle hand washing and careful drying, since the polyfill, safety eyes, and embroidery need protection.
- Hand wash in cool water with a mild detergent, supporting the stuffed head and body so the weight of the wet piece does not stretch the stitches.
- Press the water out between layers of a clean towel instead of wringing or twisting. Wringing can compress the polyfill unevenly and pull the round head and body out of shape.
- Lay the piece flat on a dry towel to air dry, reshaping the arms, legs, ears, horns, and tail while they are damp. Hanging a wet stuffed piece can stretch the seams and leave the body longer than intended.
- Keep the piece out of direct sunlight during drying and storage. Strong sun can fade the charcoal yarn over time.
- Store the dry imp in a breathable bag or box away from damp and direct sun, and check the safety eyes and embroidery for looseness before putting it away.
FAQ
What yarn and hook do I need for the Charcoal Ember Imp?
Crochet this piece with worsted weight yarn and a 4.0 mm hook. The color plan is charcoal for the head, body, arms, legs, ears, horns, and tail; black for the eyes; and coral for the ember belly. Stick with those pairings so the color placement stays as intended.
How much time should I set aside for the imp?
Plan for 5-8 hours from start to finish. That covers crocheting the parts plus the finishing and assembly steps described in the pattern. Work steadily rather than rushing, and treat the range as a guide rather than a deadline; it leaves room for your own pace.
Are the head and body made as one piece?
The head and body are separate pieces, and each one is worked in rounds. At assembly, stuff both pieces first, then sew the head to the body. That join happens at assembly, so this piece does not come off the hook with the head and body already connected.
Can I sell the finished imp I make?
You may sell the finished items you crochet. The written pattern and visual sheets are not to be resold or redistributed.
Is this pattern suitable for a beginner?
Yes, the pattern is rated Beginner. The head, body, arms, legs, ears, horns, and tail are worked in rounds, while the eyes and ember belly are finishing or embroidery instructions rather than separate crocheted pieces. Take the assembly slowly and keep the paired parts organized as you go.
Can I add a little cheek color without changing yarn?
Yes, an optional touch of dry cosmetic blush or pastel can be dusted lightly onto the cheeks with a swab or dry brush. Apply it sparingly and build up slowly so the color stays soft. Use a light hand and check the effect in day light before adding more; this is a cosmetic finish only, so the yarn assignments remain exactly as written.
Copyright 2026 AIfansHub Studio. Original pattern, photos and visual sheets. You may sell items you crochet. Reselling or republishing the pattern or sheets, as well as scraping or AI training, is prohibited.