Sage Green Snow Hare Amigurumi Pattern With Pointed Ears

What You'll Love About This Make
I finished this Sage Green Snow Hare on a quiet afternoon, and it has been sitting on the shelf beside my books ever since. It measures about 8.5 in (22 cm) tall and 3.5 in (9 cm) wide, which is that sweet spot where it fits comfortably in two hands but still reads clearly from across the room. I used worsted weight yarn and a 4.0 mm hook, so the fabric comes out dense enough to hold its shape while the surface stays soft under your thumb. The sage green keeps things calm; the long ears and the small round tail do the rest.
The head and the body are crocheted separately, both in rounds, and they stay apart until assembly. I stuffed each one first, then sewed the head to the body, because a stuffed body lines up against a stuffed head far more easily than a flat one does. The snout, arms, legs, ears, and tail are separate pieces as well, joined the same way. The eyes and the small snowflake are finishing work rather than crocheted parts. Single crochet, simple increases and decreases, and a little patience with a needle cover everything you need.
My favorite moment on the hook comes near the end, when the snout is sewn in place and the face suddenly makes sense. Up to that point you have a soft green shape with ears; after it, you have a hare. I place the eyes carefully, checking the angle from a few steps back before tying off, and the snowflake is added in finishing stitches at the very end.
At this size it works well on a dresser, a nursery shelf, or a windowsill that does not get direct sun. It also suits a gift for someone who keeps a small collection of handmade things, since the worsted fabric holds up to handling and the shape is easy to pick up. If you have made a simple ball or two before, you already have the stitches for this one.
Pattern Notes
Pattern at a glance: 10 pieces to crochet. Components and details - head, body, snout, arm, leg, ear, tail, eye and snowflake - worked in 57 rounds and rows to about 8.5 in (22 cm) tall in Worsted weight with a 4.0 mm hook.
Every crocheted piece in this hare is worked in rounds. The head, body, snout, two arms, two legs, two ears, and tail each come off the hook as their own piece, and the head and body stay separate until assembly, when I sew the head to the body after stuffing both. The eyes and the snowflake are finishing details rather than separate crocheted pieces, so they are added at the end instead of shaped on the hook.
I worked everything with a 4.0 mm hook and a smooth, soft yarn that holds its shape without splitting. The finished hare measures about eight and a half inches (22 centimeters) tall and 3.5 in (9 cm) wide, a size that sits nicely in one hand. Sage green carries the whole hare, from the head and body through the snout, limbs, ears, tail, and snowflake, while black is used only for the eyes. If sage green isn't your shade, a solid color swap works well; a few small embroidery stitches or a light touch of cheek blush bring warmth to the face.
The trickiest point on this build is the neck. If the top of the body is stuffed too softly or the head sits off center, the seam pulls and the hare looks tilted. Stuff both pieces firmly and evenly first, pin the head in place, check the profile from the side, then sew with small, close stitches around the whole opening.
What You'll Need
Finished Size: Approximately 8.5 in (22 cm) tall and 3.5 in (9 cm) wide
Skill Level: Beginner
Estimated Time: 5-8 hours
Hook Size: 4.0 mm
Yarn: Worsted yarn
| Material | Details |
|---|---|
| Yarn | Worsted: sage green 64 m (70 yd), black 2 m (3 yd). Total about 66 m (73 yd). |
| Hook | 4.0 mm crochet hook |
| Stuffing | Polyfill or fiberfill |
| Eyes | Safety eyes or embroidery thread |
| Extras | Tapestry needle, locking stitch marker, sewing pins for positioning, sharp snips |
Gauge: Approximately 12 sc x 14 rounds = 4 inches with 4.0 mm hook. It is optional to match the swatch exactly, as long as your 4.0 mm hook makes a firm fabric that supports the polyfill.

Stitches & Abbreviations
Note: This Sage Green Snow Hare pattern is written in standard US crochet terms. Work the pieces in continuous rounds unless noted otherwise, and keep a locking marker in the first stitch of each round to track your stitch counts.
| Abbreviation | Meaning |
|---|---|
| sc | Single crochet |
| inc | Increase (2 sc in same stitch) |
| dec | Decrease (sc 2 together) |

Pattern Instructions
Use the 5 visual sheets pictured throughout this post as your working pattern for the head, body, and snout on this sage green snow hare using Worsted yarn and a 4.0 mm hook. Each image opens cleanly at full size whenever you want a closer look at a row.


Technique Focus For This Project
Practical bench notes covering Stuffing the Head and Body Before the Neck Seam, Pinning Paired Ears, Arms and Legs for Symmetry, Safety Eyes and Snowflake Finishing Mechanics.
Stuffing the Head and Body Before the Neck Seam
- Work the head to its 32-stitch widest round, then decrease through rounds 11 to 15 before closing the 6-stitch opening.
- Stuff the head firmly in the center, using less polyfill near the 6-stitch closing point so the neck edge stays flat.
- Repeat for the body, filling its 28-stitch widest area evenly and tapering the stuffing toward the 6-stitch base.
Pinning Paired Ears, Arms and Legs for Symmetry
- After fastening off the two 7-stitch ears, compare their lengths and mark the base round on each piece.
- Pin both ears on the upper sides of the head, angling them outward, then check the front view before stitching.
- Set the 10-stitch arms just below the neck join, matching round heights on both sides and angling them slightly outward.
Safety Eyes and Snowflake Finishing Mechanics
- Insert both 6 mm safety eyes through the upper head before closing the opening, spacing them about one eye-width apart.
- Compare the eye height from the front and side, then press the washers onto the posts inside the 32-stitch head.
- Embroider a small curved mouth below the eyes with black thread, keeping the stitches shallow on the stuffed surface.
Assembly
1. If you use safety eyes, insert them through the head and lock both washers on the inside before closing the opening. Embroidered eyes can be added later.
2. Stuff sage green head, sage green body firmly with polyfill. Shape the stuffing with your fingers before closing the opening. Weight the stuffing towards the middle and leave the rim soft.
3. Lightly stuff the sage green arms and sage green legs with polyfill, using just enough fiberfill to keep their tube shape while remaining pliable. Check that both sides match before closing or sewing.
4. Sew head to the body. Pin the join evenly until the tilt looks level from every side, then stitch all the way around the base circle. Keep even tension on each pass of the needle as you go, then sink the yarn end inside the stuffed form.
5. Sew snout to the front of the head. Center it beneath the midpoint of the eyes, lightly stuff it with polyfill before the final stitches, and work small whipstitches around the edge.
6. Sew ears to the sides of the head. Place them high along each temple area, angling them gently outward from the curve. Pin the bases temporarily, check that they sit level from straight ahead, then whipstitch the bases closed with the tail.
7. Attach eyes to the head. Find the upper face rounds and position the eyes so their centers sit roughly one eye-width apart. Anchor it with thread, or apply a small dab of fabric glue where thread cannot reach. Sew a small mark below each eye, keeping it short and level.
8. Attach the arms to the upper sides of the body, just below the neck join, angling them slightly outward. Pin both sides symmetrically, check from the front view, then sew firmly with a whipstitch.
9. Sew the legs to the base of the body, spacing them evenly around the lower curve for a stable stance; pin the stance temporarily and check alignment from the front and side before stitching firmly around the join.
10. Sew the tail to the lower back of the body, aligned mid-back near the lower rounds to steady the figure’s balance; pin the curve angle first to test it, then close around the root.
11. Attach snowflake by embroidering directly onto the body with sage green yarn or embroidery floss, marking balanced placement with pins first. Form neat satin or straight stitches and weave the tails inside.
12. Using black or dark brown thread, embroider a small curved line below the eyes to form the mouth.
13. Check all seams are secure. Pull lightly on every piece you attached: nothing should shift. Take sharp scissors to the loose threads. Thread each tail onto a needle and pass it through the fabric twice, working in two directions. Squeeze the completed piece all over once so the fill settles where it should.

Tips & Care
Leave long tails whenever fastening off smaller parts so every seam can be whipped cleanly in matching yarn without knotting fresh strands.
Sage green worsted yarn shows every uneven stitch, so I keep my 4.0 mm hook at an even tension from the head's first round to the tail's last.
- Mark the first stitch of each round on the head, body, snout, arms, legs, ears, and tail; without it, the start of each round shifts and the snout and ears line up off center.
- Work all parts with the same 4.0 mm hook and compare each arm and leg with its partner before fastening off; a tighter piece will sit higher when sewn.
- Before whipstitching the head to the body, stuff both firmly and evenly, pin the head at center front, and check the side profile; a tilted join is difficult to fix later.
- Pin paired arms, legs, and ears at matching round heights before sewing, then check the front and side; setting one side at a time often leaves an ear forward or a leg lower.
- Leave long tails on the arms, legs, ears, and tail, route them through the seam path, and bury them inside before trimming; short tails work loose and show.
- For safety eyes, push both through the head, compare height and spacing, then press the washers on; locked washers are hard to remove without damaging stitches.
- Add the snowflake after the body is stuffed and the head is joined, pinning it before stitching so the finishing does not pucker over the stuffed surface.
- When a little warmth in the cheeks suits the finished face, I tap matte powder blush on with a cotton swab and keep it clear of the eye edges; no extra yarn shade is needed.
Because this hare uses worsted yarn, polyfill, safety eyes, and embroidery, I keep washing gentle.
- Hand wash in cool water with mild soap, supporting the head and body instead of scrubbing the embroidered areas.
- Press water out by rolling the hare in a clean towel, then reshape the head, ears, and limbs while damp.
- Air dry flat on a rack, turning once, and keep it out of direct sun so the sage green yarn does not fade unevenly.
- Check the safety eye washers after washing; if either feels loose, set the hare aside until the eye is secure.
- Store dry in a breathable bag or clean box with the face and snowflake upward, away from damp and direct light.
FAQ
How do I join the head and body on the Sage Green Snow Hare?
The head and body are made as separate pieces, so you will not crochet them as one continuous shape. Stuff both first, then sew the head to the body during assembly, working steadily around the join to keep it centered. The snout, ears, arms, legs, and tail are also separate components, so keep them nearby for the later assembly steps.
Can I use a different worsted yarn?
You can choose another worsted weight yarn and still use the 4.0 mm hook, provided the fabric works for you. Keep the weight consistent so the stitch size and stuffed shape stay close to the sample. If a new fiber behaves differently, crochet a small test swatch before beginning the hare.
How long does this hare take to crochet?
Set aside roughly 5-8 hours for the project. That includes the separate components and the finishing work, and a beginner can spread it across a few short sessions. Your own pace will affect the final time, but 5-8 hours is the intended range.
Which colors go on which parts?
Sage green is used for the head, body, snout, arms, legs, ears, tail, and snowflake. Black is used for the eye details. The eye and snowflake details are finishing or embroidery steps rather than separate crocheted pieces.
Is there a simple way to soften the face?
For a gentler expression, add a very light touch of dry cosmetic blush to the cheeks with a clean swab or dry brush. Build the color slowly and keep it subtle, since a little goes a long way on a small face. This optional styling step does not change any of the yarn colors.
May I sell the finished hare?
You may sell the finished items you crochet. Reselling or redistributing the written pattern and visual sheets is not permitted.
Copyright 2026 AIfansHub Studio. Original pattern, photos and visual sheets. You may sell items you crochet. Do not resell or republish the pattern or sheets, scrape them, or use them for AI training.